Electrical · Power electronics · Final year project
AC Power Controller With Programmable Interface
A keypad-programmable AC power controller. The user enters the required percentage of power, and an 8051 microcontroller sets the firing angle of a TRIAC in series with the load, so lamps, heaters and fans receive exactly the power selected.
What is the AC Power Controller With Programmable Interface project?
A keypad-programmable AC power controller. The user enters the required percentage of power, and an 8051 microcontroller sets the firing angle of a TRIAC in series with the load, so lamps, heaters and fans receive exactly the power selected.
Key facts
- Branch
- Electrical Engineering (EE / EEE); also suits E&TC / ECE
- Type
- Final year project · Advanced
- Suitable for
- Diploma capstone and B.E / B.Tech final year
- Build time
- 6 to 8 weeks
- Estimated component cost
- ₹2,900 – ₹4,300
- Guidance from
- ₹9,999 (Hardware / IoT Final Year)
How the AC Power Controller With Programmable Interface works
- 12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V.
- The Camera module captures images or video for recognition and monitoring.
- The 4×4 matrix keypad lets the user enter a PIN, amount or settings.
- The Push buttons and switches provide manual inputs and the power switch.
- The 8051 microcontroller with board runs the embedded C program that scans inputs and controls the outputs through its four I/O ports.
- The 16×2 LCD with I2C adapter shows readings, status and messages to the user.
- The LEDs indicate status.
Block diagram
Inputs
Camera module4×4 matrix keypadPush buttons and switchesController
8051 microcontroller with boardOutputs
16×2 LCD with I2C adapterLEDsComponents list and cost
Typical prices from Indian online stores and electronics markets (Lamington Road, Budhwar Peth, SP Road). Buy from one store where you can to save on shipping.
| Component | Qty | What it does | Approx. cost |
|---|---|---|---|
| 8051 (AT89S52) microcontroller with board | 1 | Runs the embedded C program that scans inputs and controls the outputs through its four I/O ports. | ₹300 |
| Camera module | 1 | Captures images or video for recognition and monitoring. | ₹650 |
| 4×4 matrix keypad | 1 | Lets the user enter a PIN, amount or settings. | ₹90 |
| Push buttons and switches | 2 | Provide manual inputs and the power switch. | ₹80 |
| 16×2 LCD with I2C adapter | 1 | Shows readings, status and messages to the user. | ₹220 |
| LEDs (assorted) | 1 | Indicate status. | ₹20 |
| 12 V power adapter / step-down transformer | 1 | Supplies stable low-voltage power from the mains. | ₹250 |
| Lamp | 1 | Part from the design specification | ₹150* |
| Passive components, PCB and wiring kit | 1 | Crystal oscillator, resistors (assorted), capacitors (assorted), transistors / MOSFETs, cables, connectors and jumper wires, diodes, PCB / breadboard and ICs and IC sockets. | ₹445 |
| Wiring, PCB, soldering and enclosure | 1 | Project overhead | ₹450 |
| Demo model base / mounting board | 1 | Project overhead | ₹500 |
| Testing spares and replacements | 1 | Project overhead | ₹300 |
| Estimated total | Varies with brand, quality and city | ₹2,900 – ₹4,300 |
Prices are estimates for budgeting; items marked * depend on the exact size or model chosen. We confirm the bill of materials when your design is frozen, and components are charged at actual cost with bills.
How much does this project cost?
| Option | What you get | Cost |
|---|---|---|
| Components only | You buy the parts and build it yourself | ₹2,900 – ₹4,300 |
| Hardware / IoT Final Year | Working model or guided build, Circuit diagram and bill of materials, Firmware / code with explanation | from ₹9,999 + components |
| Capstone Project (CPE) | Working project or model, Black book in MSBTE format, Step-by-step explanation | ₹9,999 + components |
| Diploma ITR | 100% working source code, Project report PDF, PPT | ₹1,999 + components |
No GST and no hidden charges. Use the cost calculator for a quote with your deadline and add-ons, or see all plans.
Download the project brief (PDF)
Summary, working, components and cost and viva questions on one branded PDF to show your guide or team. To get it developed, contact us on WhatsApp.
What you submit with this project
- Working model with circuit diagram and program code
- Project report or black book in your university's chapter order (block diagram, circuit, calculations, results)
- Presentation for the review and final viva
- Synopsis for topic approval, if your college asks for one
Electrical viva questions on this project
What is the aim of the AC Power Controller With Programmable Interface project?
A keypad-programmable AC power controller. The user enters the required percentage of power, and an 8051 microcontroller sets the firing angle of a TRIAC in series with the load, so lamps, heaters and fans receive exactly the power selected.
Explain the working of your project in short.
12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V. The Camera module captures images or video for recognition and monitoring. The 4×4 matrix keypad lets the user enter a PIN, amount or settings. The Push buttons and switches provide manual inputs and the power switch.
What is the architecture of the 8051 microcontroller?
The 8051 is an 8-bit Harvard-architecture microcontroller with 4 KB ROM (8 KB in AT89S52), 128 bytes RAM, four 8-bit I/O ports, two 16-bit timers, a UART and five interrupt sources.
How is the camera image processed?
Frames are captured and processed with OpenCV: converted to grayscale, filtered and passed to a detection or recognition model that labels faces, objects or number plates.
How does the controller read a matrix keypad?
It drives one row LOW at a time and reads the columns. A key press connects a row to a column, so the row-column pair identifies the key with only 8 pins for 16 keys.
Why is a pull-up resistor needed with a push button?
Without it the input pin floats and reads random values. The pull-up keeps it HIGH until the button connects it to ground.
Why is an I2C adapter used with the LCD?
It reduces the wiring from about 10 pins to 2 (SDA and SCL), leaving more controller pins free for sensors.
How did you calculate the power rating of your system?
Using P = V × I for each load, adding a margin of 20 to 25%.
What protection have you provided in the circuit?
A fuse against short circuit, relays or optocouplers to isolate the control side from the power side, flyback diodes across inductive loads such as relays and motors, and software limits that cut off on over-current or over-voltage.
What is the efficiency of your system and how did you measure it?
Efficiency = output power ÷ input power × 100. We measured input and output voltage and current with a multimeter at different loads and tabulated the results in the report.
Explain the block diagram of your project.
The input section senses the real-world quantity, the 8051 microcontroller with board processes it according to the program, and the output section displays the result and drives the actuators. The power supply section feeds every block.
Related projects
Academic use: Project Buddyy offers mentoring, guidance and reference material for learning. You stay responsible for following your institution's academic integrity rules and for understanding everything you submit.
Want to build AC Power Controller With Programmable Interface?
Send your college, deadline and team size. We confirm the scope, cost and what you will submit.