E&TC / ECE · Security and safety system · Final year project
Automated Elevator With Overload Alert
An elevator model that counts people and prevents overloading. Pairs of IR sensors at the door detect people entering and leaving, a 7-segment display shows the count, and an alert sounds when the limit is crossed.
What is the Automated Elevator With Overload Alert project?
An elevator model that counts people and prevents overloading. Pairs of IR sensors at the door detect people entering and leaving, a 7-segment display shows the count, and an alert sounds when the limit is crossed.
Key facts
- Branch
- Electronics & Telecommunication (E&TC / ECE); also suits Electrical, Instrumentation
- Type
- Final year project · Intermediate
- Suitable for
- Diploma capstone and B.E / B.Tech final year
- Build time
- 4 to 6 weeks
- Estimated component cost
- ₹3,000 – ₹4,400
- Guidance from
- ₹9,999 (Hardware / IoT Final Year)
How the Automated Elevator With Overload Alert works
- 12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V.
- The Push buttons and switches provide manual inputs and the power switch.
- The 8051 microcontroller with board runs the embedded C program that scans inputs and controls the outputs through its four I/O ports.
- The LEDs indicate status.
Block diagram
Inputs
Push buttons and switchesController
8051 microcontroller with boardOutputs
LEDsComponents list and cost
Typical prices from Indian online stores and electronics markets (Lamington Road, Budhwar Peth, SP Road). Buy from one store where you can to save on shipping.
| Component | Qty | What it does | Approx. cost |
|---|---|---|---|
| 8051 (AT89S52) microcontroller with board | 1 | Runs the embedded C program that scans inputs and controls the outputs through its four I/O ports. | ₹300 |
| Push buttons and switches | 2 | Provide manual inputs and the power switch. | ₹80 |
| LEDs (assorted) | 1 | Indicate status. | ₹20 |
| 12 V power adapter / step-down transformer | 1 | Supplies stable low-voltage power from the mains. | ₹250 |
| I R Transmitter Receiver | 1 | Part from the design specification | ₹150* |
| Segment Display | 7 | Part from the design specification | ₹1,050* |
| Passive components, PCB and wiring kit | 1 | Crystal oscillator, resistors (assorted), capacitors (assorted), transistors / MOSFETs, cables, connectors and jumper wires, diodes, PCB / breadboard and ICs and IC sockets. | ₹445 |
| Wiring, PCB, soldering and enclosure | 1 | Project overhead | ₹450 |
| Demo model base / mounting board | 1 | Project overhead | ₹500 |
| Testing spares and replacements | 1 | Project overhead | ₹300 |
| Estimated total | Varies with brand, quality and city | ₹3,000 – ₹4,400 |
Prices are estimates for budgeting; items marked * depend on the exact size or model chosen. We confirm the bill of materials when your design is frozen, and components are charged at actual cost with bills.
How much does this project cost?
| Option | What you get | Cost |
|---|---|---|
| Components only | You buy the parts and build it yourself | ₹3,000 – ₹4,400 |
| Hardware / IoT Final Year | Working model or guided build, Circuit diagram and bill of materials, Firmware / code with explanation | from ₹9,999 + components |
| Capstone Project (CPE) | Working project or model, Black book in MSBTE format, Step-by-step explanation | ₹9,999 + components |
| Diploma ITR | 100% working source code, Project report PDF, PPT | ₹1,999 + components |
No GST and no hidden charges. Use the cost calculator for a quote with your deadline and add-ons, or see all plans.
Download the project brief (PDF)
Summary, working, components and cost and viva questions on one branded PDF to show your guide or team. To get it developed, contact us on WhatsApp.
What you submit with this project
- Working model with circuit diagram and program code
- Project report or black book in your university's chapter order (block diagram, circuit, calculations, results)
- Presentation for the review and final viva
- Synopsis for topic approval, if your college asks for one
E&TC / ECE viva questions on this project
What is the aim of the Automated Elevator With Overload Alert project?
An elevator model that counts people and prevents overloading. Pairs of IR sensors at the door detect people entering and leaving, a 7-segment display shows the count, and an alert sounds when the limit is crossed.
Explain the working of your project in short.
12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V. The Push buttons and switches provide manual inputs and the power switch. The 8051 microcontroller with board runs the embedded C program that scans inputs and controls the outputs through its four I/O ports. The LEDs indicate status.
What is the architecture of the 8051 microcontroller?
The 8051 is an 8-bit Harvard-architecture microcontroller with 4 KB ROM (8 KB in AT89S52), 128 bytes RAM, four 8-bit I/O ports, two 16-bit timers, a UART and five interrupt sources.
Why is a pull-up resistor needed with a push button?
Without it the input pin floats and reads random values. The pull-up keeps it HIGH until the button connects it to ground.
Why is a resistor connected in series with an LED?
It limits the current to a safe value (about 10–20 mA). Without it, the LED would draw too much current and burn out. R = (supply voltage − LED voltage) ÷ current.
How is 230 V AC converted to 5 V DC for the circuit?
A transformer steps down the voltage, a bridge rectifier converts AC to pulsating DC, a capacitor smooths it and a 7805 regulator gives a steady 5 V.
Explain the block diagram of your project.
The input section senses the real-world quantity, the 8051 microcontroller with board processes it according to the program, and the output section displays the result and drives the actuators. The power supply section feeds every block.
Which communication protocols are used between the modules?
The sensors give digital or analog signals read directly by the controller's I/O and ADC pins, and outputs are driven through transistor or relay drivers.
What is the operating voltage of the circuit?
The controller and most sensors work at 5 V (ESP boards and some modules at 3.3 V). A 12 V adapter powers the board, and a regulator steps it down. Motors and relays get their own supply line so they do not reset the controller.
How did you calculate the power rating of your system?
Using P = V × I for each load, adding a margin of 20 to 25%.
What is the difference between accuracy and precision?
Accuracy is how close a reading is to the true value. Precision is how close repeated readings are to each other. A sensor can be precise but inaccurate if it is not calibrated.
Related projects
Academic use: Project Buddyy offers mentoring, guidance and reference material for learning. You stay responsible for following your institution's academic integrity rules and for understanding everything you submit.
Want to build Automated Elevator With Overload Alert?
Send your college, deadline and team size. We confirm the scope, cost and what you will submit.