E&TC / ECE · IoT · Final year project
IoT Based Anti-theft Flooring System using Raspberry Pi
A floor that detects intruders. Piezo sensors under the tiles detect footsteps, and a Raspberry Pi captures an image with its camera and sends an alert over the internet, which is hard for intruders to avoid.
What is the IoT Based Anti-theft Flooring System using Raspberry Pi project?
A floor that detects intruders. Piezo sensors under the tiles detect footsteps, and a Raspberry Pi captures an image with its camera and sends an alert over the internet, which is hard for intruders to avoid.
Key facts
- Branch
- Electronics & Telecommunication (E&TC / ECE); also suits Electrical
- Domain
- IoT projects
- Type
- Final year project · Advanced
- Suitable for
- Diploma capstone and B.E / B.Tech final year
- Build time
- 6 to 8 weeks
- Estimated component cost
- ₹7,100 – ₹10,500
- Guidance from
- ₹9,999 (Hardware / IoT Final Year)
How the IoT Based Anti-theft Flooring System using Raspberry Pi works
- 12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V.
- The Push buttons and switches provide manual inputs and the power switch.
- The Raspberry Pi 4 runs Linux and the main program, handles the camera, networking and heavier processing such as image recognition.
- The Servo motor rotates to an exact angle, used for locks, arms and flaps.
- The Buzzer gives an audible alert.
- The LEDs indicate status.
Block diagram
Inputs
Push buttons and switchesController
Raspberry Pi 4Outputs
Servo motorBuzzerLEDsComponents list and cost
Typical prices from Indian online stores and electronics markets (Lamington Road, Budhwar Peth, SP Road). Buy from one store where you can to save on shipping.
| Component | Qty | What it does | Approx. cost |
|---|---|---|---|
| Raspberry Pi 4 (2 GB) | 1 | Runs Linux and the main program, handles the camera, networking and heavier processing such as image recognition. | ₹4,800 |
| Push buttons and switches | 2 | Provide manual inputs and the power switch. | ₹80 |
| Servo motor (MG996R / SG90) | 1 | Rotates to an exact angle, used for locks, arms and flaps. | ₹350 |
| Buzzer | 1 | Gives an audible alert. | ₹20 |
| LEDs (assorted) | 1 | Indicate status. | ₹20 |
| 12 V power adapter / step-down transformer | 1 | Supplies stable low-voltage power from the mains. | ₹250 |
| microSD card 32 GB (Class 10) | 1 | Needed for this type of build. | ₹450 |
| Official 5 V 3 A USB-C supply for Raspberry Pi | 1 | Needed for this type of build. | ₹450 |
| Peizo Sensor | 1 | Part from the design specification | ₹150* |
| Wifi Modem | 1 | Part from the design specification | ₹150* |
| Passive components, PCB and wiring kit | 1 | Resistors (assorted), capacitors (assorted), transistors / MOSFETs, cables, connectors and jumper wires, diodes, PCB / breadboard and ICs and IC sockets. | ₹430 |
| Wiring, PCB, soldering and enclosure | 1 | Project overhead | ₹450 |
| Demo model base / mounting board | 1 | Project overhead | ₹500 |
| Testing spares and replacements | 1 | Project overhead | ₹300 |
| Estimated total | Varies with brand, quality and city | ₹7,100 – ₹10,500 |
Prices are estimates for budgeting; items marked * depend on the exact size or model chosen. We confirm the bill of materials when your design is frozen, and components are charged at actual cost with bills.
How much does this project cost?
| Option | What you get | Cost |
|---|---|---|
| Components only | You buy the parts and build it yourself | ₹7,100 – ₹10,500 |
| Hardware / IoT Final Year | Working model or guided build, Circuit diagram and bill of materials, Firmware / code with explanation | from ₹9,999 + components |
| Capstone Project (CPE) | Working project or model, Black book in MSBTE format, Step-by-step explanation | ₹9,999 + components |
| Diploma ITR | 100% working source code, Project report PDF, PPT | ₹1,999 + components |
No GST and no hidden charges. Use the cost calculator for a quote with your deadline and add-ons, or see all plans.
Download the project brief (PDF)
Summary, working, components and cost and viva questions on one branded PDF to show your guide or team. To get it developed, contact us on WhatsApp.
What you submit with this project
- Working model with circuit diagram and program code
- Project report or black book in your university's chapter order (block diagram, circuit, calculations, results)
- Presentation for the review and final viva
- Synopsis for topic approval, if your college asks for one
E&TC / ECE viva questions on this project
What is the aim of the IoT Based Anti-theft Flooring System using Raspberry Pi project?
A floor that detects intruders. Piezo sensors under the tiles detect footsteps, and a Raspberry Pi captures an image with its camera and sends an alert over the internet, which is hard for intruders to avoid.
Explain the working of your project in short.
12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V. The Push buttons and switches provide manual inputs and the power switch. The Raspberry Pi 4 runs Linux and the main program, handles the camera, networking and heavier processing such as image recognition. The Servo motor rotates to an exact angle, used for locks, arms and flaps.
Why did you choose a Raspberry Pi instead of an Arduino?
The Raspberry Pi is a full computer with an operating system, so it can run Python, OpenCV and a web server. An Arduino is a microcontroller that is better for simple real-time control but cannot process images or run multiple programs.
Why is a pull-up resistor needed with a push button?
Without it the input pin floats and reads random values. The pull-up keeps it HIGH until the button connects it to ground.
How is a servo motor controlled?
With a PWM signal at 50 Hz. A pulse of 1 ms gives about 0°, 1.5 ms gives 90° and 2 ms gives 180°. The internal feedback potentiometer holds the angle.
What is the difference between an active and a passive buzzer?
An active buzzer has a built-in oscillator and beeps on DC. A passive buzzer needs a square wave from the controller, which allows different tones.
Why is a resistor connected in series with an LED?
It limits the current to a safe value (about 10–20 mA). Without it, the LED would draw too much current and burn out. R = (supply voltage − LED voltage) ÷ current.
Explain the block diagram of your project.
The input section senses the real-world quantity, the Raspberry Pi 4 processes it according to the program, and the output section displays the result and drives the actuators. The power supply section feeds every block.
Which communication protocols are used between the modules?
The sensors give digital or analog signals read directly by the controller's I/O and ADC pins, and outputs are driven through transistor or relay drivers.
What is the operating voltage of the circuit?
The controller and most sensors work at 5 V (ESP boards and some modules at 3.3 V). A 12 V adapter powers the board, and a regulator steps it down. Motors and relays get their own supply line so they do not reset the controller.
How did you calculate the power rating of your system?
Using P = V × I for each load, adding a margin of 20 to 25%.
Related projects
Academic use: Project Buddyy offers mentoring, guidance and reference material for learning. You stay responsible for following your institution's academic integrity rules and for understanding everything you submit.
Want to build IoT Based Anti-theft Flooring System using Raspberry Pi?
Send your college, deadline and team size. We confirm the scope, cost and what you will submit.