Mechanical · Machine and manufacturing · Final year project
PLC Based Smart Elevator Control System
A PLC-controlled lift model. Floor sensors, call buttons and load sensing are handled by the PLC for smooth, stable operation between floors.
What is the PLC Based Smart Elevator Control System project?
A PLC-controlled lift model. Floor sensors, call buttons and load sensing are handled by the PLC for smooth, stable operation between floors.
Key facts
- Branch
- Mechanical & Automobile Engineering; also suits Mechatronics, Instrumentation
- Type
- Final year project · Advanced
- Suitable for
- Diploma capstone and B.E / B.Tech final year
- Build time
- 6 to 8 weeks
- Estimated component cost
- ₹13,800 – ₹20,400
- Guidance from
- ₹9,999 (Hardware / IoT Final Year)
How the PLC Based Smart Elevator Control System works
- The mild steel frame and fabrication forms the base that carries every other part, so it is designed first from the load and size of the machine.
- The DC geared motor provides the driving motion.
- Motion is transmitted through DC geared motor, which set the speed, torque and direction at the working end.
- The Compact PLC runs the ladder logic that sequences the machine's inputs and outputs, the way industry automates processes.
- The Push buttons and switches provide manual inputs and the power switch.
- The Relay module switches mains or high-current loads such as lamps, pumps and fans from a low-voltage signal.
Block diagram
Power
Relay moduleDC geared motorTransmission
DC geared motorStructure
Frame and mountsComponents list and cost
Typical prices from Indian online stores and electronics markets (Lamington Road, Budhwar Peth, SP Road). Buy from one store where you can to save on shipping.
| Component | Qty | What it does | Approx. cost |
|---|---|---|---|
| Compact PLC (e.g. Delta DVP / Siemens LOGO!) | 1 | Runs the ladder logic that sequences the machine's inputs and outputs, the way industry automates processes. | ₹9,500 |
| Push buttons and switches | 1 | Provide manual inputs and the power switch. | ₹40 |
| Relay module | 1 | Switches mains or high-current loads such as lamps, pumps and fans from a low-voltage signal. | ₹70 |
| DC geared motor | 1 | Provides the driving motion. | ₹250 |
| LEDs (assorted) | 1 | Indicate status. | ₹20 |
| Mild steel frame and fabrication | 1 | Forms the main structure that holds all parts. | ₹2,500 |
| Welding, cutting and machining labour | 1 | Needed for this type of build. | ₹2,200 |
| Proximity Sensors | 1 | Part from the design specification | ₹400* |
| Mounts, screws, nuts and small hardware | 1 | Enclosure, mounts and fasteners. | ₹300 |
| Paint, finishing and workshop consumables | 1 | Project overhead | ₹600 |
| Transport of material | 1 | Project overhead | ₹400 |
| Estimated total | Varies with brand, quality and city | ₹13,800 – ₹20,400 |
Prices are estimates for budgeting; items marked * depend on the exact size or model chosen. We confirm the bill of materials when your design is frozen, and components are charged at actual cost with bills.
How much does this project cost?
| Option | What you get | Cost |
|---|---|---|
| Components only | You buy the parts and build it yourself | ₹13,800 – ₹20,400 |
| Hardware / IoT Final Year | Working model or guided build, Circuit diagram and bill of materials, Firmware / code with explanation | from ₹9,999 + components |
| Capstone Project (CPE) | Working project or model, Black book in MSBTE format, Step-by-step explanation | ₹9,999 + components |
| Diploma ITR | 100% working source code, Project report PDF, PPT | ₹1,999 + components |
No GST and no hidden charges. Use the cost calculator for a quote with your deadline and add-ons, or see all plans.
Download the project brief (PDF)
Summary, working, components and cost and viva questions on one branded PDF to show your guide or team. To get it developed, contact us on WhatsApp.
What you submit with this project
- Working model with circuit diagram and program code
- Project report or black book in your university's chapter order (block diagram, circuit, calculations, results)
- Presentation for the review and final viva
- Synopsis for topic approval, if your college asks for one
Mechanical viva questions on this project
What is the aim of the PLC Based Smart Elevator Control System project?
A PLC-controlled lift model. Floor sensors, call buttons and load sensing are handled by the PLC for smooth, stable operation between floors.
Explain the working of your project in short.
The mild steel frame and fabrication forms the base that carries every other part, so it is designed first from the load and size of the machine. The DC geared motor provides the driving motion. Motion is transmitted through DC geared motor, which set the speed, torque and direction at the working end. The Compact PLC runs the ladder logic that sequences the machine's inputs and outputs, the way industry automates processes.
Why is a PLC preferred over a microcontroller in industry?
A PLC is rugged, works on 24 V industrial signals, tolerates noise and heat, and is programmed in ladder logic that maintenance staff understand. It is also easy to modify on site.
Why is a pull-up resistor needed with a push button?
Without it the input pin floats and reads random values. The pull-up keeps it HIGH until the button connects it to ground.
Why is a relay used?
It electrically isolates the 5 V control circuit from the high-voltage load. The controller energises the coil through a transistor, and the contacts switch the load.
Why is a geared motor used?
The gearbox reduces speed and multiplies torque, so a small DC motor can move a vehicle or mechanism smoothly. Torque increases roughly by the gear ratio.
Why is a resistor connected in series with an LED?
It limits the current to a safe value (about 10–20 mA). Without it, the LED would draw too much current and burn out. R = (supply voltage − LED voltage) ÷ current.
Which material did you select for the main parts and why?
Mild steel (MS) is used for the frame because it is strong, cheap, easy to cut and weld and available everywhere. Shafts are made of EN8 or bright mild steel for strength, and parts that do not carry load can be aluminium or acrylic to reduce weight.
What factor of safety did you take in your design?
A factor of safety of 2 to 3 is taken for static parts and 3 to 5 for parts under shock or fatigue loading. Allowable stress = yield strength ÷ factor of safety, and each part is checked against it.
How did you estimate the cost of the project?
The cost is the sum of raw material, bought-out parts, machining or fabrication and overheads. Our estimate for this model is about ₹13,800 to ₹20,400, depending on size, material and the workshop rates in your city.
Which manufacturing processes were used?
Cutting and grinding of sections, arc or MIG welding of the frame, drilling for mounting holes, turning of the shafts and fitting of bearings and the drive, followed by assembly, alignment and painting.
Is your system open-loop or closed-loop?
Mainly open-loop: the controller runs the actuators for a set time or number of steps. Adding a sensor for feedback would make it closed-loop and more accurate.
Related projects
Academic use: Project Buddyy offers mentoring, guidance and reference material for learning. You stay responsible for following your institution's academic integrity rules and for understanding everything you submit.
Want to build PLC Based Smart Elevator Control System?
Send your college, deadline and team size. We confirm the scope, cost and what you will submit.