Electrical · EV and battery · Final year project
Smart Wireless Battery Charging With Charge Monitor
A wireless battery charger that also measures the charge level. Power is transferred through coils without wires, and the circuit charges the battery until it reaches 100%.
What is the Smart Wireless Battery Charging With Charge Monitor project?
A wireless battery charger that also measures the charge level. Power is transferred through coils without wires, and the circuit charges the battery until it reaches 100%.
Key facts
- Branch
- Electrical Engineering (EE / EEE); also suits E&TC / ECE, Instrumentation
- Domain
- EV and battery projects
- Type
- Final year project · Intermediate
- Suitable for
- Diploma capstone and B.E / B.Tech final year
- Build time
- 4 to 6 weeks
- Estimated component cost
- ₹2,200 – ₹3,300
- Guidance from
- ₹9,999 (Hardware / IoT Final Year)
How the Smart Wireless Battery Charging With Charge Monitor works
- 12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V.
- The Push buttons and switches provide manual inputs and the power switch.
- The ATmega328P microcontroller with base board is the brain of the circuit: it samples the sensors, compares readings with set limits and switches the outputs.
- The Relay module switches mains or high-current loads such as lamps, pumps and fans from a low-voltage signal.
- The Motor driver lets the low-current controller run the motors forward, reverse and at variable speed.
- The LEDs indicate status.
Block diagram
Inputs
Push buttons and switchesController
ATmega328P microcontroller with base boardOutputs
Relay moduleMotor driverLEDsComponents list and cost
Typical prices from Indian online stores and electronics markets (Lamington Road, Budhwar Peth, SP Road). Buy from one store where you can to save on shipping.
| Component | Qty | What it does | Approx. cost |
|---|---|---|---|
| ATmega328P microcontroller with base board | 1 | Is the brain of the circuit: it samples the sensors, compares readings with set limits and switches the outputs. | ₹350 |
| Push buttons and switches | 2 | Provide manual inputs and the power switch. | ₹80 |
| Relay module | 1 | Switches mains or high-current loads such as lamps, pumps and fans from a low-voltage signal. | ₹70 |
| Motor driver (L298N) | 1 | Lets the low-current controller run the motors forward, reverse and at variable speed. | ₹180 |
| LEDs (assorted) | 1 | Indicate status. | ₹20 |
| 12 V power adapter / step-down transformer | 1 | Supplies stable low-voltage power from the mains. | ₹250 |
| Passive components, PCB and wiring kit | 1 | Resistors (assorted), capacitors (assorted), transistors / MOSFETs, cables, connectors and jumper wires, diodes, PCB / breadboard and ICs and IC sockets. | ₹430 |
| Wiring, PCB, soldering and enclosure | 1 | Project overhead | ₹450 |
| Demo model base / mounting board | 1 | Project overhead | ₹500 |
| Testing spares and replacements | 1 | Project overhead | ₹300 |
| Estimated total | Varies with brand, quality and city | ₹2,200 – ₹3,300 |
Prices are estimates for budgeting. We confirm the bill of materials when your design is frozen, and components are charged at actual cost with bills.
How much does this project cost?
| Option | What you get | Cost |
|---|---|---|
| Components only | You buy the parts and build it yourself | ₹2,200 – ₹3,300 |
| Hardware / IoT Final Year | Working model or guided build, Circuit diagram and bill of materials, Firmware / code with explanation | from ₹9,999 + components |
| Capstone Project (CPE) | Working project or model, Black book in MSBTE format, Step-by-step explanation | ₹9,999 + components |
| Diploma ITR | 100% working source code, Project report PDF, PPT | ₹1,999 + components |
No GST and no hidden charges. Use the cost calculator for a quote with your deadline and add-ons, or see all plans.
Download the project brief (PDF)
Summary, working, components and cost and viva questions on one branded PDF to show your guide or team. To get it developed, contact us on WhatsApp.
What you submit with this project
- Working model with circuit diagram and program code
- Project report or black book in your university's chapter order (block diagram, circuit, calculations, results)
- Presentation for the review and final viva
- Synopsis for topic approval, if your college asks for one
Electrical viva questions on this project
What is the aim of the Smart Wireless Battery Charging With Charge Monitor project?
A wireless battery charger that also measures the charge level. Power is transferred through coils without wires, and the circuit charges the battery until it reaches 100%.
Explain the working of your project in short.
12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V. The Push buttons and switches provide manual inputs and the power switch. The ATmega328P microcontroller with base board is the brain of the circuit: it samples the sensors, compares readings with set limits and switches the outputs. The Relay module switches mains or high-current loads such as lamps, pumps and fans from a low-voltage signal.
Why is a microcontroller used in this project?
A microcontroller combines a CPU, memory and I/O pins on one chip, so a single low-cost IC can read sensors, make decisions in code and control loads without a computer.
Why is a pull-up resistor needed with a push button?
Without it the input pin floats and reads random values. The pull-up keeps it HIGH until the button connects it to ground.
Why is a relay used?
It electrically isolates the 5 V control circuit from the high-voltage load. The controller energises the coil through a transistor, and the contacts switch the load.
Why can't the motor be connected directly to the microcontroller?
A motor needs far more current (hundreds of mA to amps) than a controller pin can supply (about 20–40 mA). The H-bridge driver switches the motor current and allows direction control.
Why is a resistor connected in series with an LED?
It limits the current to a safe value (about 10–20 mA). Without it, the LED would draw too much current and burn out. R = (supply voltage − LED voltage) ÷ current.
How did you calculate the power rating of your system?
Using P = V × I for each load, adding a margin of 20 to 25%.
What protection have you provided in the circuit?
A fuse against short circuit, relays or optocouplers to isolate the control side from the power side, flyback diodes across inductive loads such as relays and motors, and software limits that cut off on over-current or over-voltage.
What is the efficiency of your system and how did you measure it?
Efficiency = output power ÷ input power × 100. We measured input and output voltage and current with a multimeter at different loads and tabulated the results in the report.
Explain the block diagram of your project.
The input section senses the real-world quantity, the ATmega328P microcontroller with base board processes it according to the program, and the output section displays the result and drives the actuators. The power supply section feeds every block.
What is the difference between accuracy and precision?
Accuracy is how close a reading is to the true value. Precision is how close repeated readings are to each other. A sensor can be precise but inaccurate if it is not calibrated.
Related projects
Academic use: Project Buddyy offers mentoring, guidance and reference material for learning. You stay responsible for following your institution's academic integrity rules and for understanding everything you submit.
Want to build Smart Wireless Battery Charging With Charge Monitor?
Send your college, deadline and team size. We confirm the scope, cost and what you will submit.