E&TC / ECE · Solar and power electronics · Final year project
Supervisory Controlling Plus Data Acquisition For Remote Industry
A small SCADA system for monitoring a remote plant. Temperature sensors are read by an 8051 microcontroller and sent to a PC, which logs the data and allows supervisory control.
What is the Supervisory Controlling Plus Data Acquisition For Remote Industry project?
A small SCADA system for monitoring a remote plant. Temperature sensors are read by an 8051 microcontroller and sent to a PC, which logs the data and allows supervisory control.
Key facts
- Branch
- Electronics & Telecommunication (E&TC / ECE); also suits Electrical
- Type
- Final year project · Intermediate
- Suitable for
- Diploma capstone and B.E / B.Tech final year
- Build time
- 4 to 6 weeks
- Estimated component cost
- ₹2,400 – ₹3,500
- Guidance from
- ₹9,999 (Hardware / IoT Final Year)
How the Supervisory Controlling Plus Data Acquisition For Remote Industry works
- 12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V.
- The Temperature sensor measures the temperature that the system monitors or controls.
- The Push buttons and switches provide manual inputs and the power switch.
- The 8051 microcontroller with board runs the embedded C program that scans inputs and controls the outputs through its four I/O ports.
- The Relay module switches mains or high-current loads such as lamps, pumps and fans from a low-voltage signal.
- The Motor driver lets the low-current controller run the motors forward, reverse and at variable speed.
- The LEDs indicate status.
Block diagram
Inputs
Temperature sensorPush buttons and switchesController
8051 microcontroller with boardOutputs
Relay moduleMotor driverLEDsComponents list and cost
Typical prices from Indian online stores and electronics markets (Lamington Road, Budhwar Peth, SP Road). Buy from one store where you can to save on shipping.
| Component | Qty | What it does | Approx. cost |
|---|---|---|---|
| 8051 (AT89S52) microcontroller with board | 1 | Runs the embedded C program that scans inputs and controls the outputs through its four I/O ports. | ₹300 |
| Temperature sensor (LM35 / DS18B20) | 1 | Measures the temperature that the system monitors or controls. | ₹90 |
| Push buttons and switches | 2 | Provide manual inputs and the power switch. | ₹80 |
| Relay module | 1 | Switches mains or high-current loads such as lamps, pumps and fans from a low-voltage signal. | ₹70 |
| Motor driver (L298N) | 1 | Lets the low-current controller run the motors forward, reverse and at variable speed. | ₹180 |
| LEDs (assorted) | 1 | Indicate status. | ₹20 |
| 12 V power adapter / step-down transformer | 1 | Supplies stable low-voltage power from the mains. | ₹250 |
| Loads | 1 | Part from the design specification | ₹150* |
| Passive components, PCB and wiring kit | 1 | ICs and IC sockets, cables, connectors and jumper wires, resistors (assorted), capacitors (assorted), transistors / MOSFETs, diodes and PCB / breadboard. | ₹430 |
| Wiring, PCB, soldering and enclosure | 1 | Project overhead | ₹450 |
| Demo model base / mounting board | 1 | Project overhead | ₹500 |
| Testing spares and replacements | 1 | Project overhead | ₹300 |
| Estimated total | Varies with brand, quality and city | ₹2,400 – ₹3,500 |
Prices are estimates for budgeting; items marked * depend on the exact size or model chosen. We confirm the bill of materials when your design is frozen, and components are charged at actual cost with bills.
How much does this project cost?
| Option | What you get | Cost |
|---|---|---|
| Components only | You buy the parts and build it yourself | ₹2,400 – ₹3,500 |
| Hardware / IoT Final Year | Working model or guided build, Circuit diagram and bill of materials, Firmware / code with explanation | from ₹9,999 + components |
| Capstone Project (CPE) | Working project or model, Black book in MSBTE format, Step-by-step explanation | ₹9,999 + components |
| Diploma ITR | 100% working source code, Project report PDF, PPT | ₹1,999 + components |
No GST and no hidden charges. Use the cost calculator for a quote with your deadline and add-ons, or see all plans.
Download the project brief (PDF)
Summary, working, components and cost and viva questions on one branded PDF to show your guide or team. To get it developed, contact us on WhatsApp.
What you submit with this project
- Working model with circuit diagram and program code
- Project report or black book in your university's chapter order (block diagram, circuit, calculations, results)
- Presentation for the review and final viva
- Synopsis for topic approval, if your college asks for one
E&TC / ECE viva questions on this project
What is the aim of the Supervisory Controlling Plus Data Acquisition For Remote Industry project?
A small SCADA system for monitoring a remote plant. Temperature sensors are read by an 8051 microcontroller and sent to a PC, which logs the data and allows supervisory control.
Explain the working of your project in short.
12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V. The Temperature sensor measures the temperature that the system monitors or controls. The Push buttons and switches provide manual inputs and the power switch. The 8051 microcontroller with board runs the embedded C program that scans inputs and controls the outputs through its four I/O ports.
What is the architecture of the 8051 microcontroller?
The 8051 is an 8-bit Harvard-architecture microcontroller with 4 KB ROM (8 KB in AT89S52), 128 bytes RAM, four 8-bit I/O ports, two 16-bit timers, a UART and five interrupt sources.
How does the LM35 temperature sensor work?
LM35 gives an analog output of 10 mV per °C, so 250 mV means 25 °C. The controller reads it with the ADC and converts the value to degrees.
Why is a pull-up resistor needed with a push button?
Without it the input pin floats and reads random values. The pull-up keeps it HIGH until the button connects it to ground.
Why is a relay used?
It electrically isolates the 5 V control circuit from the high-voltage load. The controller energises the coil through a transistor, and the contacts switch the load.
Why can't the motor be connected directly to the microcontroller?
A motor needs far more current (hundreds of mA to amps) than a controller pin can supply (about 20–40 mA). The H-bridge driver switches the motor current and allows direction control.
Explain the block diagram of your project.
The input section senses the real-world quantity, the 8051 microcontroller with board processes it according to the program, and the output section displays the result and drives the actuators. The power supply section feeds every block.
Which communication protocols are used between the modules?
A single-wire digital protocol for the temperature sensor and analog inputs read by the ADC for the analog sensors. Each protocol was chosen because the module supports it and it uses the fewest pins.
What is the operating voltage of the circuit?
The controller and most sensors work at 5 V (ESP boards and some modules at 3.3 V). A 12 V adapter powers the board, and a regulator steps it down. Motors and relays get their own supply line so they do not reset the controller.
How did you calculate the power rating of your system?
Using P = V × I for each load, adding a margin of 20 to 25%.
Related projects
Academic use: Project Buddyy offers mentoring, guidance and reference material for learning. You stay responsible for following your institution's academic integrity rules and for understanding everything you submit.
Want to build Supervisory Controlling Plus Data Acquisition For Remote Industry?
Send your college, deadline and team size. We confirm the scope, cost and what you will submit.