E&TC / ECE · Wireless communication · Final year project
Wireless Doorbell Calling System
A wireless doorbell. Pressing the button at the door sends an RF signal up to about 9 metres to the indoor unit, which sounds a buzzer.
What is the Wireless Doorbell Calling System project?
A wireless doorbell. Pressing the button at the door sends an RF signal up to about 9 metres to the indoor unit, which sounds a buzzer.
Key facts
- Branch
- Electronics & Telecommunication (E&TC / ECE); also suits Electrical
- Type
- Final year project · Intermediate
- Suitable for
- Diploma capstone and B.E / B.Tech final year
- Build time
- 4 to 6 weeks
- Estimated component cost
- ₹3,100 – ₹4,600
- Guidance from
- ₹9,999 (Hardware / IoT Final Year)
How the Wireless Doorbell Calling System works
- Rechargeable battery and 12 V power adapter / step-down transformer supply the circuit; a regulator gives the controller and sensors a steady 5 V.
- The Push buttons and switches provide manual inputs and the power switch.
- The Arduino Uno R3 reads the inputs, runs the decision logic written in C/C++ and drives the outputs.
- The 433 MHz RF transmitter-receiver pair sends the remote's button press wirelessly to the receiver circuit.
- The Buzzer gives an audible alert.
- The LEDs indicate status.
Block diagram
Inputs
Push buttons and switchesController
Arduino Uno R3Communication
433 MHz RF transmitter-receiver pairOutputs
BuzzerLEDsComponents list and cost
Typical prices from Indian online stores and electronics markets (Lamington Road, Budhwar Peth, SP Road). Buy from one store where you can to save on shipping.
| Component | Qty | What it does | Approx. cost |
|---|---|---|---|
| Arduino Uno R3 | 1 | Reads the inputs, runs the decision logic written in C/C++ and drives the outputs. | ₹550 |
| Push buttons and switches | 2 | Provide manual inputs and the power switch. | ₹80 |
| 433 MHz RF transmitter-receiver pair | 3 | Sends the remote's button press wirelessly to the receiver circuit. | ₹450 |
| Buzzer | 1 | Gives an audible alert. | ₹20 |
| LEDs (assorted) | 1 | Indicate status. | ₹20 |
| Rechargeable battery (12 V 1.3–7 Ah) | 1 | Stores energy and supplies power when mains is absent. | ₹650 |
| 12 V power adapter / step-down transformer | 1 | Supplies stable low-voltage power from the mains. | ₹250 |
| Passive components, PCB and wiring kit | 1 | Cables, connectors and jumper wires, resistors (assorted), capacitors (assorted), transistors / MOSFETs, diodes, PCB / breadboard and ICs and IC sockets. | ₹430 |
| Wiring, PCB, soldering and enclosure | 1 | Project overhead | ₹450 |
| Demo model base / mounting board | 1 | Project overhead | ₹500 |
| Testing spares and replacements | 1 | Project overhead | ₹300 |
| Estimated total | Varies with brand, quality and city | ₹3,100 – ₹4,600 |
Prices are estimates for budgeting. We confirm the bill of materials when your design is frozen, and components are charged at actual cost with bills.
How much does this project cost?
| Option | What you get | Cost |
|---|---|---|
| Components only | You buy the parts and build it yourself | ₹3,100 – ₹4,600 |
| Hardware / IoT Final Year | Working model or guided build, Circuit diagram and bill of materials, Firmware / code with explanation | from ₹9,999 + components |
| Capstone Project (CPE) | Working project or model, Black book in MSBTE format, Step-by-step explanation | ₹9,999 + components |
| Diploma ITR | 100% working source code, Project report PDF, PPT | ₹1,999 + components |
No GST and no hidden charges. Use the cost calculator for a quote with your deadline and add-ons, or see all plans.
Download the project brief (PDF)
Summary, working, components and cost and viva questions on one branded PDF to show your guide or team. To get it developed, contact us on WhatsApp.
What you submit with this project
- Working model with circuit diagram and program code
- Project report or black book in your university's chapter order (block diagram, circuit, calculations, results)
- Presentation for the review and final viva
- Synopsis for topic approval, if your college asks for one
E&TC / ECE viva questions on this project
What is the aim of the Wireless Doorbell Calling System project?
A wireless doorbell. Pressing the button at the door sends an RF signal up to about 9 metres to the indoor unit, which sounds a buzzer.
Explain the working of your project in short.
Rechargeable battery and 12 V power adapter / step-down transformer supply the circuit; a regulator gives the controller and sensors a steady 5 V. The Push buttons and switches provide manual inputs and the power switch. The Arduino Uno R3 reads the inputs, runs the decision logic written in C/C++ and drives the outputs. The 433 MHz RF transmitter-receiver pair sends the remote's button press wirelessly to the receiver circuit.
What microcontroller is on the Arduino Uno and what are its key specifications?
The Uno uses the ATmega328P: 8-bit, 16 MHz clock, 32 KB flash, 2 KB SRAM, 14 digital I/O pins (6 PWM) and 6 analog inputs with a 10-bit ADC.
Why is a pull-up resistor needed with a push button?
Without it the input pin floats and reads random values. The pull-up keeps it HIGH until the button connects it to ground.
Why are encoder and decoder ICs used with the RF module?
The HT12E encoder converts parallel button inputs into a serial code with an address, and the HT12D decoder on the receiver checks the address and restores the outputs. This prevents interference from other remotes.
What is the difference between an active and a passive buzzer?
An active buzzer has a built-in oscillator and beeps on DC. A passive buzzer needs a square wave from the controller, which allows different tones.
Why is a resistor connected in series with an LED?
It limits the current to a safe value (about 10–20 mA). Without it, the LED would draw too much current and burn out. R = (supply voltage − LED voltage) ÷ current.
Explain the block diagram of your project.
The input section senses the real-world quantity, the Arduino Uno R3 processes it according to the program, and the output section acts locally and sends the data or alert wirelessly. The power supply section feeds every block.
Which communication protocols are used between the modules?
The sensors give digital or analog signals read directly by the controller's I/O and ADC pins, and outputs are driven through transistor or relay drivers.
What is the operating voltage of the circuit?
The controller and most sensors work at 5 V (ESP boards and some modules at 3.3 V). The battery powers the board, and a regulator steps it down. Motors and relays get their own supply line so they do not reset the controller.
How did you calculate the power rating of your system?
Using P = V × I for each load, adding a margin of 20 to 25%. Battery capacity is the energy needed per day divided by the battery voltage and allowable depth of discharge.
Related projects
Academic use: Project Buddyy offers mentoring, guidance and reference material for learning. You stay responsible for following your institution's academic integrity rules and for understanding everything you submit.
Want to build Wireless Doorbell Calling System?
Send your college, deadline and team size. We confirm the scope, cost and what you will submit.