E&TC / ECE · Security and safety system · Final year project
Accident Identification and Alerting
A system that reports a vehicle accident to a nearby control room. A vibration sensor on the vehicle detects the impact, and a microcontroller sends the vehicle's ID through an RF transmitter; the receiver at the control room displays which vehicle needs help.
What is the Accident Identification and Alerting project?
A system that reports a vehicle accident to a nearby control room. A vibration sensor on the vehicle detects the impact, and a microcontroller sends the vehicle's ID through an RF transmitter; the receiver at the control room displays which vehicle needs help.
Key facts
- Type
- Final year project · Intermediate
- Suitable for
- Diploma capstone and B.E / B.Tech final year
- Build time
- 4 to 6 weeks
- Estimated component cost
- ₹3,000 – ₹4,400
- Guidance from
- ₹9,999 (Hardware / IoT Final Year)
How the Accident Identification and Alerting works
- 12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V.
- The Push buttons and switches provide manual inputs and the power switch.
- The ATmega328P microcontroller with base board is the brain of the circuit: it samples the sensors, compares readings with set limits and switches the outputs.
- The GSM module sends SMS alerts or makes calls to the registered phone number using a normal SIM card.
- The GPS module receives satellite signals and gives the latitude and longitude of the device.
- The LEDs indicate status.
Block diagram
Inputs
Push buttons and switchesController
ATmega328P microcontroller with base boardCommunication
GSM moduleGPS moduleOutputs
LEDsComponents list and cost
Typical prices from Indian online stores and electronics markets (Lamington Road, Budhwar Peth, SP Road). Buy from one store where you can to save on shipping.
| Component | Qty | What it does | Approx. cost |
|---|---|---|---|
| ATmega328P microcontroller with base board | 1 | Is the brain of the circuit: it samples the sensors, compares readings with set limits and switches the outputs. | ₹350 |
| Push buttons and switches | 2 | Provide manual inputs and the power switch. | ₹80 |
| GSM module (SIM800L) | 1 | Sends SMS alerts or makes calls to the registered phone number using a normal SIM card. | ₹450 |
| GPS module (NEO-6M) | 1 | Receives satellite signals and gives the latitude and longitude of the device. | ₹650 |
| LEDs (assorted) | 1 | Indicate status. | ₹20 |
| 12 V power adapter / step-down transformer | 1 | Supplies stable low-voltage power from the mains. | ₹250 |
| Passive components, PCB and wiring kit | 1 | Crystal oscillator, resistors (assorted), capacitors (assorted), transistors / MOSFETs, cables, connectors and jumper wires, diodes, PCB / breadboard and ICs and IC sockets. | ₹445 |
| Wiring, PCB, soldering and enclosure | 1 | Project overhead | ₹450 |
| Demo model base / mounting board | 1 | Project overhead | ₹500 |
| Testing spares and replacements | 1 | Project overhead | ₹300 |
| Estimated total | Varies with brand, quality and city | ₹3,000 – ₹4,400 |
Prices are estimates for budgeting. We confirm the bill of materials when your design is frozen, and components are charged at actual cost with bills.
How much does this project cost?
| Option | What you get | Cost |
|---|---|---|
| Components only | You buy the parts and build it yourself | ₹3,000 – ₹4,400 |
| Hardware / IoT Final Year | Working model or guided build, Circuit diagram and bill of materials, Firmware / code with explanation | from ₹9,999 + components |
| Capstone Project (CPE) | Working project or model, Black book in MSBTE format, Step-by-step explanation | ₹9,999 + components |
| Diploma ITR | 100% working source code, Project report PDF, PPT | ₹1,999 + components |
No GST and no hidden charges. Use the cost calculator for a quote with your deadline and add-ons, or see all plans.
Download the project brief (PDF)
Summary, working, components and cost and viva questions on one branded PDF to show your guide or team. To get it developed, contact us on WhatsApp.
What you submit with this project
- Working model with circuit diagram and program code
- Project report or black book in your university's chapter order (block diagram, circuit, calculations, results)
- Presentation for the review and final viva
- Synopsis for topic approval, if your college asks for one
E&TC / ECE viva questions on this project
What is the aim of the Accident Identification and Alerting project?
A system that reports a vehicle accident to a nearby control room. A vibration sensor on the vehicle detects the impact, and a microcontroller sends the vehicle's ID through an RF transmitter; the receiver at the control room displays which vehicle needs help.
Explain the working of your project in short.
12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V. The Push buttons and switches provide manual inputs and the power switch. The ATmega328P microcontroller with base board is the brain of the circuit: it samples the sensors, compares readings with set limits and switches the outputs. The GSM module sends SMS alerts or makes calls to the registered phone number using a normal SIM card.
Why is a microcontroller used in this project?
A microcontroller combines a CPU, memory and I/O pins on one chip, so a single low-cost IC can read sensors, make decisions in code and control loads without a computer.
Why is a pull-up resistor needed with a push button?
Without it the input pin floats and reads random values. The pull-up keeps it HIGH until the button connects it to ground.
How does the GSM module send an SMS?
The microcontroller sends AT commands over serial, for example AT+CMGF=1 to select text mode and AT+CMGS with the phone number followed by the message. The module transmits it over the mobile network.
How does a GPS module find its location?
It receives timing signals from at least four satellites, calculates the distance to each from the signal delay and solves for its position. The module outputs NMEA sentences like $GPGGA with latitude, longitude and time.
Why is a resistor connected in series with an LED?
It limits the current to a safe value (about 10–20 mA). Without it, the LED would draw too much current and burn out. R = (supply voltage − LED voltage) ÷ current.
Explain the block diagram of your project.
The input section senses the real-world quantity, the ATmega328P microcontroller with base board processes it according to the program, and the output section acts locally and sends the data or alert wirelessly. The power supply section feeds every block.
Which communication protocols are used between the modules?
UART (serial) for the GSM, GPS, Bluetooth or fingerprint modules. Each protocol was chosen because the module supports it and it uses the fewest pins.
What is the operating voltage of the circuit?
The controller and most sensors work at 5 V (ESP boards and some modules at 3.3 V). A 12 V adapter powers the board, and a regulator steps it down. Motors and relays get their own supply line so they do not reset the controller.
Related projects
Academic use: Project Buddyy offers mentoring, guidance and reference material for learning. You stay responsible for following your institution's academic integrity rules and for understanding everything you submit.
Want to build Accident Identification and Alerting?
Send your college, deadline and team size. We confirm the scope, cost and what you will submit.