Electrical · Energy metering and billing · Final year project
ATMEGA Microcontroller Based Commercial Power Saver
A power factor correction unit that reduces energy loss in commercial installations. An ATmega328 measures the time lag between voltage and current zero crossings and switches in shunt capacitors to bring the power factor close to unity.
What is the ATMEGA Microcontroller Based Commercial Power Saver project?
A power factor correction unit that reduces energy loss in commercial installations. An ATmega328 measures the time lag between voltage and current zero crossings and switches in shunt capacitors to bring the power factor close to unity.
Key facts
- Branch
- Electrical Engineering (EE / EEE); also suits E&TC / ECE
- Type
- Final year project · Intermediate
- Suitable for
- Diploma capstone and B.E / B.Tech final year
- Build time
- 4 to 6 weeks
- Estimated component cost
- ₹2,300 – ₹3,400
- Guidance from
- ₹9,999 (Hardware / IoT Final Year)
How the ATMEGA Microcontroller Based Commercial Power Saver works
- 12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V.
- The Push buttons and switches provide manual inputs and the power switch.
- The Microcontroller board processes sensor inputs and controls the outputs according to the program.
- The LEDs indicate status.
Block diagram
Inputs
Push buttons and switchesController
Microcontroller boardOutputs
LEDsComponents list and cost
Typical prices from Indian online stores and electronics markets (Lamington Road, Budhwar Peth, SP Road). Buy from one store where you can to save on shipping.
| Component | Qty | What it does | Approx. cost |
|---|---|---|---|
| Microcontroller board | 1 | Processes sensor inputs and controls the outputs according to the program. | ₹400 |
| Push buttons and switches | 2 | Provide manual inputs and the power switch. | ₹80 |
| LEDs (assorted) | 1 | Indicate status. | ₹20 |
| 12 V power adapter / step-down transformer | 1 | Supplies stable low-voltage power from the mains. | ₹250 |
| Lamp | 1 | Part from the design specification | ₹150* |
| Choke | 1 | Part from the design specification | ₹150* |
| Passive components, PCB and wiring kit | 1 | Crystal oscillator, resistors (assorted), capacitors (assorted), transistors / MOSFETs, cables, connectors and jumper wires, diodes, PCB / breadboard and ICs and IC sockets. | ₹445 |
| Wiring, PCB, soldering and enclosure | 1 | Project overhead | ₹450 |
| Demo model base / mounting board | 1 | Project overhead | ₹500 |
| Testing spares and replacements | 1 | Project overhead | ₹300 |
| Estimated total | Varies with brand, quality and city | ₹2,300 – ₹3,400 |
Prices are estimates for budgeting; items marked * depend on the exact size or model chosen. We confirm the bill of materials when your design is frozen, and components are charged at actual cost with bills.
How much does this project cost?
| Option | What you get | Cost |
|---|---|---|
| Components only | You buy the parts and build it yourself | ₹2,300 – ₹3,400 |
| Hardware / IoT Final Year | Working model or guided build, Circuit diagram and bill of materials, Firmware / code with explanation | from ₹9,999 + components |
| Capstone Project (CPE) | Working project or model, Black book in MSBTE format, Step-by-step explanation | ₹9,999 + components |
| Diploma ITR | 100% working source code, Project report PDF, PPT | ₹1,999 + components |
No GST and no hidden charges. Use the cost calculator for a quote with your deadline and add-ons, or see all plans.
Download the project brief (PDF)
Summary, working, components and cost and viva questions on one branded PDF to show your guide or team. To get it developed, contact us on WhatsApp.
What you submit with this project
- Working model with circuit diagram and program code
- Project report or black book in your university's chapter order (block diagram, circuit, calculations, results)
- Presentation for the review and final viva
- Synopsis for topic approval, if your college asks for one
Electrical viva questions on this project
What is the aim of the ATMEGA Microcontroller Based Commercial Power Saver project?
A power factor correction unit that reduces energy loss in commercial installations. An ATmega328 measures the time lag between voltage and current zero crossings and switches in shunt capacitors to bring the power factor close to unity.
Explain the working of your project in short.
12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V. The Push buttons and switches provide manual inputs and the power switch. The Microcontroller board processes sensor inputs and controls the outputs according to the program. The LEDs indicate status.
What is the difference between a microprocessor and a microcontroller?
A microprocessor is only a CPU and needs external memory and I/O chips. A microcontroller has the CPU, RAM, ROM, timers and I/O on a single chip, which makes it cheaper and better for dedicated control tasks.
Why is a pull-up resistor needed with a push button?
Without it the input pin floats and reads random values. The pull-up keeps it HIGH until the button connects it to ground.
Why is a resistor connected in series with an LED?
It limits the current to a safe value (about 10–20 mA). Without it, the LED would draw too much current and burn out. R = (supply voltage − LED voltage) ÷ current.
How is 230 V AC converted to 5 V DC for the circuit?
A transformer steps down the voltage, a bridge rectifier converts AC to pulsating DC, a capacitor smooths it and a 7805 regulator gives a steady 5 V.
How did you calculate the power rating of your system?
Using P = V × I for each load, adding a margin of 20 to 25%.
What protection have you provided in the circuit?
A fuse against short circuit, relays or optocouplers to isolate the control side from the power side, flyback diodes across inductive loads such as relays and motors, and software limits that cut off on over-current or over-voltage.
What is the efficiency of your system and how did you measure it?
Efficiency = output power ÷ input power × 100. We measured input and output voltage and current with a multimeter at different loads and tabulated the results in the report.
Explain the block diagram of your project.
The input section senses the real-world quantity, the Microcontroller board processes it according to the program, and the output section displays the result and drives the actuators. The power supply section feeds every block.
Related projects
Academic use: Project Buddyy offers mentoring, guidance and reference material for learning. You stay responsible for following your institution's academic integrity rules and for understanding everything you submit.
Want to build ATMEGA Microcontroller Based Commercial Power Saver?
Send your college, deadline and team size. We confirm the scope, cost and what you will submit.