E&TC / ECE · Robotics and drone · Final year project
Robotic Vehicle Controlled By Hand Gesture Using PIC
A robot car controlled by hand gestures. An accelerometer on a glove detects hand tilts and sends commands to the PIC microcontroller on the vehicle.
What is the Robotic Vehicle Controlled By Hand Gesture Using PIC project?
A robot car controlled by hand gestures. An accelerometer on a glove detects hand tilts and sends commands to the PIC microcontroller on the vehicle.
Key facts
- Branch
- Electronics & Telecommunication (E&TC / ECE); also suits Mechatronics
- Type
- Final year project · Advanced
- Suitable for
- Diploma capstone and B.E / B.Tech final year
- Build time
- 6 to 8 weeks
- Estimated component cost
- ₹8,500 – ₹12,500
- Guidance from
- ₹9,999 (Hardware / IoT Final Year)
How the Robotic Vehicle Controlled By Hand Gesture Using PIC works
- 12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V.
- The Accelerometer-gyroscope measures tilt, motion and sudden impacts.
- The Push buttons and switches provide manual inputs and the power switch.
- The PIC16F877A microcontroller with board handles the control logic, ADC readings and output switching.
- The DC geared motor provides the driving motion.
- The Motor driver lets the low-current controller run the motors forward, reverse and at variable speed.
- The LEDs indicate status.
Block diagram
Inputs
Accelerometer-gyroscopePush buttons and switchesController
PIC16F877A microcontroller with boardOutputs
DC geared motorMotor driverLEDsComponents list and cost
Typical prices from Indian online stores and electronics markets (Lamington Road, Budhwar Peth, SP Road). Buy from one store where you can to save on shipping.
| Component | Qty | What it does | Approx. cost |
|---|---|---|---|
| PIC16F877A microcontroller with board | 1 | Handles the control logic, ADC readings and output switching. | ₹380 |
| Accelerometer-gyroscope (MPU6050) | 1 | Measures tilt, motion and sudden impacts. | ₹180 |
| Push buttons and switches | 2 | Provide manual inputs and the power switch. | ₹80 |
| DC geared motor | 2 | Provides the driving motion. | ₹500 |
| Motor driver (L298N) | 1 | Lets the low-current controller run the motors forward, reverse and at variable speed. | ₹180 |
| LEDs (assorted) | 1 | Indicate status. | ₹20 |
| 12 V power adapter / step-down transformer | 1 | Supplies stable low-voltage power from the mains. | ₹250 |
| Mild steel frame and fabrication | 1 | Forms the main structure that holds all parts. | ₹2,500 |
| Robot chassis (metal / acrylic) | 1 | Needed for this type of build. | ₹1,100 |
| Wheels / castor wheels | 4 | Allow the machine or vehicle to move. | ₹1,600 |
| Li-ion battery pack (18650 × 3, 11.1 V) with BMS | 1 | Needed for this type of build. | ₹1,400 |
| Hand Glove | 1 | Part from the design specification | ₹150* |
| Passive components, PCB and wiring kit | 1 | Crystal oscillator, resistors (assorted), capacitors (assorted), transistors / MOSFETs, cables, connectors and jumper wires, diodes, PCB / breadboard and ICs and IC sockets. | ₹445 |
| Wiring, PCB, soldering and enclosure | 1 | Project overhead | ₹450 |
| Demo model base / mounting board | 1 | Project overhead | ₹500 |
| Testing spares and replacements | 1 | Project overhead | ₹300 |
| Estimated total | Varies with brand, quality and city | ₹8,500 – ₹12,500 |
Prices are estimates for budgeting; items marked * depend on the exact size or model chosen. We confirm the bill of materials when your design is frozen, and components are charged at actual cost with bills.
How much does this project cost?
| Option | What you get | Cost |
|---|---|---|
| Components only | You buy the parts and build it yourself | ₹8,500 – ₹12,500 |
| Hardware / IoT Final Year | Working model or guided build, Circuit diagram and bill of materials, Firmware / code with explanation | from ₹9,999 + components |
| Capstone Project (CPE) | Working project or model, Black book in MSBTE format, Step-by-step explanation | ₹9,999 + components |
| Diploma ITR | 100% working source code, Project report PDF, PPT | ₹1,999 + components |
No GST and no hidden charges. Use the cost calculator for a quote with your deadline and add-ons, or see all plans.
Download the project brief (PDF)
Summary, working, components and cost and viva questions on one branded PDF to show your guide or team. To get it developed, contact us on WhatsApp.
What you submit with this project
- Working model with circuit diagram and program code
- Project report or black book in your university's chapter order (block diagram, circuit, calculations, results)
- Presentation for the review and final viva
- Synopsis for topic approval, if your college asks for one
E&TC / ECE viva questions on this project
What is the aim of the Robotic Vehicle Controlled By Hand Gesture Using PIC project?
A robot car controlled by hand gestures. An accelerometer on a glove detects hand tilts and sends commands to the PIC microcontroller on the vehicle.
Explain the working of your project in short.
12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V. The Accelerometer-gyroscope measures tilt, motion and sudden impacts. The Push buttons and switches provide manual inputs and the power switch. The PIC16F877A microcontroller with board handles the control logic, ADC readings and output switching.
What are the features of the PIC16F877A?
It is an 8-bit RISC microcontroller with 8 KB flash, 368 bytes RAM, 33 I/O pins, an 8-channel 10-bit ADC, two PWM modules, USART, SPI and I2C.
How does an accelerometer detect a fall or accident?
It measures acceleration on three axes. A sudden spike above a threshold, followed by an unusual orientation, indicates a fall or collision.
Why is a pull-up resistor needed with a push button?
Without it the input pin floats and reads random values. The pull-up keeps it HIGH until the button connects it to ground.
Why is a geared motor used?
The gearbox reduces speed and multiplies torque, so a small DC motor can move a vehicle or mechanism smoothly. Torque increases roughly by the gear ratio.
Why can't the motor be connected directly to the microcontroller?
A motor needs far more current (hundreds of mA to amps) than a controller pin can supply (about 20–40 mA). The H-bridge driver switches the motor current and allows direction control.
Explain the block diagram of your project.
The input section senses the real-world quantity, the PIC16F877A microcontroller with board processes it according to the program, and the output section displays the result and drives the actuators. The power supply section feeds every block.
Which communication protocols are used between the modules?
I2C for the display, RTC or motion sensor (only SDA and SCL lines). Each protocol was chosen because the module supports it and it uses the fewest pins.
What is the operating voltage of the circuit?
The controller and most sensors work at 5 V (ESP boards and some modules at 3.3 V). The battery powers the board, and a regulator steps it down. Motors and relays get their own supply line so they do not reset the controller.
Is your system open-loop or closed-loop?
Closed-loop: sensors measure the actual position, distance or condition and the controller corrects the actuators until the target is reached.
Related projects
Academic use: Project Buddyy offers mentoring, guidance and reference material for learning. You stay responsible for following your institution's academic integrity rules and for understanding everything you submit.
Want to build Robotic Vehicle Controlled By Hand Gesture Using PIC?
Send your college, deadline and team size. We confirm the scope, cost and what you will submit.