E&TC / ECE · Embedded and digital electronics · Final year project
Speaking System For Mute People Using Hand Gestures
A glove that speaks for mute people. Flex and motion sensors read hand gestures, and a Raspberry Pi converts each gesture into a spoken phrase through a speaker.
What is the Speaking System For Mute People Using Hand Gestures project?
A glove that speaks for mute people. Flex and motion sensors read hand gestures, and a Raspberry Pi converts each gesture into a spoken phrase through a speaker.
Key facts
- Type
- Final year project · Intermediate
- Suitable for
- Diploma capstone and B.E / B.Tech final year
- Build time
- 4 to 6 weeks
- Estimated component cost
- ₹7,100 – ₹10,400
- Guidance from
- ₹9,999 (Hardware / IoT Final Year)
How the Speaking System For Mute People Using Hand Gestures works
- 12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V.
- The Accelerometer-gyroscope measures tilt, motion and sudden impacts.
- The Flex sensor measures finger bending in a glove.
- The Push buttons and switches provide manual inputs and the power switch.
- The Raspberry Pi 4 runs Linux and the main program, handles the camera, networking and heavier processing such as image recognition.
- The 16×2 LCD with I2C adapter shows readings, status and messages to the user.
- The Voice playback module with speaker plays recorded voice announcements.
- The LEDs indicate status.
Block diagram
Inputs
Accelerometer-gyroscopeFlex sensorPush buttons and switchesController
Raspberry Pi 4Outputs
16×2 LCD with I2C adapterVoice playback module with speakerLEDsComponents list and cost
Typical prices from Indian online stores and electronics markets (Lamington Road, Budhwar Peth, SP Road). Buy from one store where you can to save on shipping.
| Component | Qty | What it does | Approx. cost |
|---|---|---|---|
| Raspberry Pi 4 (2 GB) | 1 | Runs Linux and the main program, handles the camera, networking and heavier processing such as image recognition. | ₹4,800 |
| Accelerometer-gyroscope (MPU6050) | 1 | Measures tilt, motion and sudden impacts. | ₹180 |
| Flex sensor | 1 | Measures finger bending in a glove. | ₹650 |
| Push buttons and switches | 2 | Provide manual inputs and the power switch. | ₹80 |
| 16×2 LCD with I2C adapter | 1 | Shows readings, status and messages to the user. | ₹220 |
| Voice playback module with speaker | 1 | Plays recorded voice announcements. | ₹280 |
| LEDs (assorted) | 1 | Indicate status. | ₹20 |
| 12 V power adapter / step-down transformer | 1 | Supplies stable low-voltage power from the mains. | ₹250 |
| Gloves | 1 | Part from the design specification | ₹150* |
| Passive components, PCB and wiring kit | 1 | Crystal oscillator, resistors (assorted), capacitors (assorted), transistors / MOSFETs, cables, connectors and jumper wires, diodes, PCB / breadboard and ICs and IC sockets. | ₹445 |
| Wiring, PCB, soldering and enclosure | 1 | Project overhead | ₹450 |
| Demo model base / mounting board | 1 | Project overhead | ₹500 |
| Testing spares and replacements | 1 | Project overhead | ₹300 |
| Estimated total | Varies with brand, quality and city | ₹7,100 – ₹10,400 |
Prices are estimates for budgeting; items marked * depend on the exact size or model chosen. We confirm the bill of materials when your design is frozen, and components are charged at actual cost with bills.
How much does this project cost?
| Option | What you get | Cost |
|---|---|---|
| Components only | You buy the parts and build it yourself | ₹7,100 – ₹10,400 |
| Hardware / IoT Final Year | Working model or guided build, Circuit diagram and bill of materials, Firmware / code with explanation | from ₹9,999 + components |
| Capstone Project (CPE) | Working project or model, Black book in MSBTE format, Step-by-step explanation | ₹9,999 + components |
| Diploma ITR | 100% working source code, Project report PDF, PPT | ₹1,999 + components |
No GST and no hidden charges. Use the cost calculator for a quote with your deadline and add-ons, or see all plans.
Download the project brief (PDF)
Summary, working, components and cost and viva questions on one branded PDF to show your guide or team. To get it developed, contact us on WhatsApp.
What you submit with this project
- Working model with circuit diagram and program code
- Project report or black book in your university's chapter order (block diagram, circuit, calculations, results)
- Presentation for the review and final viva
- Synopsis for topic approval, if your college asks for one
E&TC / ECE viva questions on this project
What is the aim of the Speaking System For Mute People Using Hand Gestures project?
A glove that speaks for mute people. Flex and motion sensors read hand gestures, and a Raspberry Pi converts each gesture into a spoken phrase through a speaker.
Explain the working of your project in short.
12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V. The Accelerometer-gyroscope measures tilt, motion and sudden impacts. The Flex sensor measures finger bending in a glove. The Push buttons and switches provide manual inputs and the power switch.
Why did you choose a Raspberry Pi instead of an Arduino?
The Raspberry Pi is a full computer with an operating system, so it can run Python, OpenCV and a web server. An Arduino is a microcontroller that is better for simple real-time control but cannot process images or run multiple programs.
How does an accelerometer detect a fall or accident?
It measures acceleration on three axes. A sudden spike above a threshold, followed by an unusual orientation, indicates a fall or collision.
How does a flex sensor work?
Its resistance increases as it bends. In a voltage divider, the output voltage tells the controller how much the finger is bent.
Why is a pull-up resistor needed with a push button?
Without it the input pin floats and reads random values. The pull-up keeps it HIGH until the button connects it to ground.
Why is an I2C adapter used with the LCD?
It reduces the wiring from about 10 pins to 2 (SDA and SCL), leaving more controller pins free for sensors.
Explain the block diagram of your project.
The input section senses the real-world quantity, the Raspberry Pi 4 processes it according to the program, and the output section displays the result and drives the actuators. The power supply section feeds every block.
Which communication protocols are used between the modules?
UART (serial) for the GSM, GPS, Bluetooth or fingerprint modules, I2C for the display, RTC or motion sensor (only SDA and SCL lines) and analog inputs read by the ADC for the analog sensors. Each protocol was chosen because the module supports it and it uses the fewest pins.
What is the operating voltage of the circuit?
The controller and most sensors work at 5 V (ESP boards and some modules at 3.3 V). A 12 V adapter powers the board, and a regulator steps it down. Motors and relays get their own supply line so they do not reset the controller.
Related projects
Academic use: Project Buddyy offers mentoring, guidance and reference material for learning. You stay responsible for following your institution's academic integrity rules and for understanding everything you submit.
Want to build Speaking System For Mute People Using Hand Gestures?
Send your college, deadline and team size. We confirm the scope, cost and what you will submit.