E&TC / ECE · Wireless communication · Final year project
TV Remote Controlled Home Automation PIC
Home appliances controlled with a TV remote using a PIC microcontroller. The IR receiver decodes RC5 codes from the remote and the controller switches loads through relays.
What is the TV Remote Controlled Home Automation PIC project?
Home appliances controlled with a TV remote using a PIC microcontroller. The IR receiver decodes RC5 codes from the remote and the controller switches loads through relays.
Key facts
- Branch
- Electronics & Telecommunication (E&TC / ECE); also suits Mechatronics
- Type
- Final year project · Intermediate
- Suitable for
- Diploma capstone and B.E / B.Tech final year
- Build time
- 4 to 6 weeks
- Estimated component cost
- ₹2,500 – ₹3,700
- Guidance from
- ₹9,999 (Hardware / IoT Final Year)
How the TV Remote Controlled Home Automation PIC works
- 12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V.
- The IR obstacle sensor module detects an object or line in front of it by reflected infrared light.
- The Push buttons and switches provide manual inputs and the power switch.
- The 8051 microcontroller with board runs the embedded C program that scans inputs and controls the outputs through its four I/O ports.
- The Relay module switches mains or high-current loads such as lamps, pumps and fans from a low-voltage signal.
- The 16×2 LCD with I2C adapter shows readings, status and messages to the user.
- The LEDs indicate status.
Block diagram
Inputs
IR obstacle sensor modulePush buttons and switchesController
8051 microcontroller with boardOutputs
Relay module16×2 LCD with I2C adapterLEDsComponents list and cost
Typical prices from Indian online stores and electronics markets (Lamington Road, Budhwar Peth, SP Road). Buy from one store where you can to save on shipping.
| Component | Qty | What it does | Approx. cost |
|---|---|---|---|
| 8051 (AT89S52) microcontroller with board | 1 | Runs the embedded C program that scans inputs and controls the outputs through its four I/O ports. | ₹300 |
| IR obstacle sensor module | 1 | Detects an object or line in front of it by reflected infrared light. | ₹45 |
| Push buttons and switches | 2 | Provide manual inputs and the power switch. | ₹80 |
| Relay module | 1 | Switches mains or high-current loads such as lamps, pumps and fans from a low-voltage signal. | ₹70 |
| 16×2 LCD with I2C adapter | 1 | Shows readings, status and messages to the user. | ₹220 |
| LEDs (assorted) | 1 | Indicate status. | ₹20 |
| 12 V power adapter / step-down transformer | 1 | Supplies stable low-voltage power from the mains. | ₹250 |
| Tv Remote | 1 | Part from the design specification | ₹150* |
| Lamps | 1 | Part from the design specification | ₹150* |
| Passive components, PCB and wiring kit | 1 | ICs and IC sockets, crystal oscillator, resistors (assorted), capacitors (assorted), transistors / MOSFETs, cables, connectors and jumper wires, diodes and PCB / breadboard. | ₹445 |
| Wiring, PCB, soldering and enclosure | 1 | Project overhead | ₹450 |
| Demo model base / mounting board | 1 | Project overhead | ₹500 |
| Testing spares and replacements | 1 | Project overhead | ₹300 |
| Estimated total | Varies with brand, quality and city | ₹2,500 – ₹3,700 |
Prices are estimates for budgeting; items marked * depend on the exact size or model chosen. We confirm the bill of materials when your design is frozen, and components are charged at actual cost with bills.
How much does this project cost?
| Option | What you get | Cost |
|---|---|---|
| Components only | You buy the parts and build it yourself | ₹2,500 – ₹3,700 |
| Hardware / IoT Final Year | Working model or guided build, Circuit diagram and bill of materials, Firmware / code with explanation | from ₹9,999 + components |
| Capstone Project (CPE) | Working project or model, Black book in MSBTE format, Step-by-step explanation | ₹9,999 + components |
| Diploma ITR | 100% working source code, Project report PDF, PPT | ₹1,999 + components |
No GST and no hidden charges. Use the cost calculator for a quote with your deadline and add-ons, or see all plans.
Download the project brief (PDF)
Summary, working, components and cost and viva questions on one branded PDF to show your guide or team. To get it developed, contact us on WhatsApp.
What you submit with this project
- Working model with circuit diagram and program code
- Project report or black book in your university's chapter order (block diagram, circuit, calculations, results)
- Presentation for the review and final viva
- Synopsis for topic approval, if your college asks for one
E&TC / ECE viva questions on this project
What is the aim of the TV Remote Controlled Home Automation PIC project?
Home appliances controlled with a TV remote using a PIC microcontroller. The IR receiver decodes RC5 codes from the remote and the controller switches loads through relays.
Explain the working of your project in short.
12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V. The IR obstacle sensor module detects an object or line in front of it by reflected infrared light. The Push buttons and switches provide manual inputs and the power switch. The 8051 microcontroller with board runs the embedded C program that scans inputs and controls the outputs through its four I/O ports.
What is the architecture of the 8051 microcontroller?
The 8051 is an 8-bit Harvard-architecture microcontroller with 4 KB ROM (8 KB in AT89S52), 128 bytes RAM, four 8-bit I/O ports, two 16-bit timers, a UART and five interrupt sources.
How does an IR obstacle sensor work?
An IR LED emits light and a photodiode receives the reflection. When an object is close, more light is reflected and the comparator (LM393) switches the output.
Why is a pull-up resistor needed with a push button?
Without it the input pin floats and reads random values. The pull-up keeps it HIGH until the button connects it to ground.
Why is a relay used?
It electrically isolates the 5 V control circuit from the high-voltage load. The controller energises the coil through a transistor, and the contacts switch the load.
Why is an I2C adapter used with the LCD?
It reduces the wiring from about 10 pins to 2 (SDA and SCL), leaving more controller pins free for sensors.
Explain the block diagram of your project.
The input section senses the real-world quantity, the 8051 microcontroller with board processes it according to the program, and the output section displays the result and drives the actuators. The power supply section feeds every block.
Which communication protocols are used between the modules?
I2C for the display, RTC or motion sensor (only SDA and SCL lines). Each protocol was chosen because the module supports it and it uses the fewest pins.
What is the operating voltage of the circuit?
The controller and most sensors work at 5 V (ESP boards and some modules at 3.3 V). A 12 V adapter powers the board, and a regulator steps it down. Motors and relays get their own supply line so they do not reset the controller.
Is your system open-loop or closed-loop?
Closed-loop: sensors measure the actual position, distance or condition and the controller corrects the actuators until the target is reached.
Related projects
Academic use: Project Buddyy offers mentoring, guidance and reference material for learning. You stay responsible for following your institution's academic integrity rules and for understanding everything you submit.
Want to build TV Remote Controlled Home Automation PIC?
Send your college, deadline and team size. We confirm the scope, cost and what you will submit.