E&TC / ECE · Security and safety system · Final year project
Ultrasonic Object Detection
An ultrasonic detector that senses objects ahead. The transducer sends 40 kHz pulses and an 8051 microcontroller detects echoes, useful for monitoring and triggering wildlife cameras.
What is the Ultrasonic Object Detection project?
An ultrasonic detector that senses objects ahead. The transducer sends 40 kHz pulses and an 8051 microcontroller detects echoes, useful for monitoring and triggering wildlife cameras.
Key facts
- Type
- Final year project · Intermediate
- Suitable for
- Diploma capstone and B.E / B.Tech final year
- Build time
- 4 to 6 weeks
- Estimated component cost
- ₹2,400 – ₹3,600
- Guidance from
- ₹9,999 (Hardware / IoT Final Year)
How the Ultrasonic Object Detection works
- 12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V.
- The Ultrasonic sensor measures distance to an obstacle or a liquid surface using sound echoes.
- The 8051 microcontroller with board runs the embedded C program that scans inputs and controls the outputs through its four I/O ports.
- The GSM module sends SMS alerts or makes calls to the registered phone number using a normal SIM card.
- The 16×2 LCD with I2C adapter shows readings, status and messages to the user.
Block diagram
Inputs
Ultrasonic sensorController
8051 microcontroller with boardCommunication
GSM moduleOutputs
16×2 LCD with I2C adapterComponents list and cost
Typical prices from Indian online stores and electronics markets (Lamington Road, Budhwar Peth, SP Road). Buy from one store where you can to save on shipping.
| Component | Qty | What it does | Approx. cost |
|---|---|---|---|
| 8051 (AT89S52) microcontroller with board | 1 | Runs the embedded C program that scans inputs and controls the outputs through its four I/O ports. | ₹300 |
| Ultrasonic sensor (HC-SR04) | 1 | Measures distance to an obstacle or a liquid surface using sound echoes. | ₹90 |
| GSM module (SIM800L) | 1 | Sends SMS alerts or makes calls to the registered phone number using a normal SIM card. | ₹450 |
| 16×2 LCD with I2C adapter | 1 | Shows readings, status and messages to the user. | ₹220 |
| 12 V power adapter / step-down transformer | 1 | Supplies stable low-voltage power from the mains. | ₹250 |
| Passive components, PCB and wiring kit | 1 | Resistors (assorted), capacitors (assorted), PCB / breadboard and cables, connectors and jumper wires. | ₹310 |
| Wiring, PCB, soldering and enclosure | 1 | Project overhead | ₹450 |
| Demo model base / mounting board | 1 | Project overhead | ₹500 |
| Testing spares and replacements | 1 | Project overhead | ₹300 |
| Estimated total | Varies with brand, quality and city | ₹2,400 – ₹3,600 |
Prices are estimates for budgeting. We confirm the bill of materials when your design is frozen, and components are charged at actual cost with bills.
How much does this project cost?
| Option | What you get | Cost |
|---|---|---|
| Components only | You buy the parts and build it yourself | ₹2,400 – ₹3,600 |
| Hardware / IoT Final Year | Working model or guided build, Circuit diagram and bill of materials, Firmware / code with explanation | from ₹9,999 + components |
| Capstone Project (CPE) | Working project or model, Black book in MSBTE format, Step-by-step explanation | ₹9,999 + components |
| Diploma ITR | 100% working source code, Project report PDF, PPT | ₹1,999 + components |
No GST and no hidden charges. Use the cost calculator for a quote with your deadline and add-ons, or see all plans.
Download the project brief (PDF)
Summary, working, components and cost and viva questions on one branded PDF to show your guide or team. To get it developed, contact us on WhatsApp.
What you submit with this project
- Working model with circuit diagram and program code
- Project report or black book in your university's chapter order (block diagram, circuit, calculations, results)
- Presentation for the review and final viva
- Synopsis for topic approval, if your college asks for one
E&TC / ECE viva questions on this project
What is the aim of the Ultrasonic Object Detection project?
An ultrasonic detector that senses objects ahead. The transducer sends 40 kHz pulses and an 8051 microcontroller detects echoes, useful for monitoring and triggering wildlife cameras.
Explain the working of your project in short.
12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V. The Ultrasonic sensor measures distance to an obstacle or a liquid surface using sound echoes. The 8051 microcontroller with board runs the embedded C program that scans inputs and controls the outputs through its four I/O ports. The GSM module sends SMS alerts or makes calls to the registered phone number using a normal SIM card.
What is the architecture of the 8051 microcontroller?
The 8051 is an 8-bit Harvard-architecture microcontroller with 4 KB ROM (8 KB in AT89S52), 128 bytes RAM, four 8-bit I/O ports, two 16-bit timers, a UART and five interrupt sources.
How does the ultrasonic sensor measure distance?
It sends a 40 kHz pulse and measures the time until the echo returns. Distance = (time × speed of sound 343 m/s) ÷ 2. The HC-SR04 works from 2 cm to about 4 m.
How does the GSM module send an SMS?
The microcontroller sends AT commands over serial, for example AT+CMGF=1 to select text mode and AT+CMGS with the phone number followed by the message. The module transmits it over the mobile network.
Why is an I2C adapter used with the LCD?
It reduces the wiring from about 10 pins to 2 (SDA and SCL), leaving more controller pins free for sensors.
How is 230 V AC converted to 5 V DC for the circuit?
A transformer steps down the voltage, a bridge rectifier converts AC to pulsating DC, a capacitor smooths it and a 7805 regulator gives a steady 5 V.
Explain the block diagram of your project.
The input section senses the real-world quantity, the 8051 microcontroller with board processes it according to the program, and the output section acts locally and sends the data or alert wirelessly. The power supply section feeds every block.
Which communication protocols are used between the modules?
UART (serial) for the GSM, GPS, Bluetooth or fingerprint modules and I2C for the display, RTC or motion sensor (only SDA and SCL lines). Each protocol was chosen because the module supports it and it uses the fewest pins.
What is the operating voltage of the circuit?
The controller and most sensors work at 5 V (ESP boards and some modules at 3.3 V). A 12 V adapter powers the board, and a regulator steps it down. Motors and relays get their own supply line so they do not reset the controller.
Related projects
Academic use: Project Buddyy offers mentoring, guidance and reference material for learning. You stay responsible for following your institution's academic integrity rules and for understanding everything you submit.
Want to build Ultrasonic Object Detection?
Send your college, deadline and team size. We confirm the scope, cost and what you will submit.