E&TC / ECE · Security and safety system · Mini project
Ultrasonic Radar
An ultrasonic radar that guards an area. A sensor on a servo sweeps back and forth, and when it detects an unauthorised person or animal, a buzzer sounds and the LCD shows the detection.
What is the Ultrasonic Radar project?
An ultrasonic radar that guards an area. A sensor on a servo sweeps back and forth, and when it detects an unauthorised person or animal, a buzzer sounds and the LCD shows the detection.
Key facts
- Branch
- Electronics & Telecommunication (E&TC / ECE); also suits Electrical
- Type
- Mini project · Beginner
- Suitable for
- Diploma micro-projects and B.E mini projects
- Build time
- 2 to 3 weeks
- Estimated component cost
- ₹2,100 – ₹3,000
- Guidance from
- ₹2,999 (Core Branch Mini Project)
How the Ultrasonic Radar works
- 12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V.
- The Ultrasonic sensor measures distance to an obstacle or a liquid surface using sound echoes.
- The Push buttons and switches provide manual inputs and the power switch.
- The 8051 microcontroller with board runs the embedded C program that scans inputs and controls the outputs through its four I/O ports.
- The LEDs indicate status.
Block diagram
Inputs
Ultrasonic sensorPush buttons and switchesController
8051 microcontroller with boardOutputs
LEDsComponents list and cost
Typical prices from Indian online stores and electronics markets (Lamington Road, Budhwar Peth, SP Road). Buy from one store where you can to save on shipping.
| Component | Qty | What it does | Approx. cost |
|---|---|---|---|
| 8051 (AT89S52) microcontroller with board | 1 | Runs the embedded C program that scans inputs and controls the outputs through its four I/O ports. | ₹300 |
| Ultrasonic sensor (HC-SR04) | 1 | Measures distance to an obstacle or a liquid surface using sound echoes. | ₹90 |
| Push buttons and switches | 2 | Provide manual inputs and the power switch. | ₹80 |
| LEDs (assorted) | 1 | Indicate status. | ₹20 |
| 12 V power adapter / step-down transformer | 1 | Supplies stable low-voltage power from the mains. | ₹250 |
| Passive components, PCB and wiring kit | 1 | Crystal oscillator, resistors (assorted), capacitors (assorted), transistors / MOSFETs, cables, connectors and jumper wires, diodes, PCB / breadboard and ICs and IC sockets. | ₹445 |
| Wiring, PCB, soldering and enclosure | 1 | Project overhead | ₹450 |
| Demo model base / mounting board | 1 | Project overhead | ₹500 |
| Testing spares and replacements | 1 | Project overhead | ₹300 |
| Estimated total | Varies with brand, quality and city | ₹2,100 – ₹3,000 |
Prices are estimates for budgeting. We confirm the bill of materials when your design is frozen, and components are charged at actual cost with bills.
How much does this project cost?
| Option | What you get | Cost |
|---|---|---|
| Components only | You buy the parts and build it yourself | ₹2,100 – ₹3,000 |
| Core Branch Mini Project | MATLAB / Proteus / CAD simulation files, Code, firmware or 2D drawings, Mini project report (20–30 pages) | ₹2,999 + components |
| Diploma Micro-Project | Micro-project report (10–15 pages), Relevant code, model or case study, MSBTE annexures | ₹899 + components |
No GST and no hidden charges. Use the cost calculator for a quote with your deadline and add-ons, or see all plans.
Download the project brief (PDF)
Summary, working, components and cost and viva questions on one branded PDF to show your guide or team. To get it developed, contact us on WhatsApp.
What you submit with this project
- Working model with circuit diagram and program code
- Project report or black book in your university's chapter order (block diagram, circuit, calculations, results)
- Presentation for the review and final viva
- Synopsis for topic approval, if your college asks for one
E&TC / ECE viva questions on this project
What is the aim of the Ultrasonic Radar project?
An ultrasonic radar that guards an area. A sensor on a servo sweeps back and forth, and when it detects an unauthorised person or animal, a buzzer sounds and the LCD shows the detection.
Explain the working of your project in short.
12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V. The Ultrasonic sensor measures distance to an obstacle or a liquid surface using sound echoes. The Push buttons and switches provide manual inputs and the power switch. The 8051 microcontroller with board runs the embedded C program that scans inputs and controls the outputs through its four I/O ports.
What is the architecture of the 8051 microcontroller?
The 8051 is an 8-bit Harvard-architecture microcontroller with 4 KB ROM (8 KB in AT89S52), 128 bytes RAM, four 8-bit I/O ports, two 16-bit timers, a UART and five interrupt sources.
How does the ultrasonic sensor measure distance?
It sends a 40 kHz pulse and measures the time until the echo returns. Distance = (time × speed of sound 343 m/s) ÷ 2. The HC-SR04 works from 2 cm to about 4 m.
Why is a pull-up resistor needed with a push button?
Without it the input pin floats and reads random values. The pull-up keeps it HIGH until the button connects it to ground.
Why is a resistor connected in series with an LED?
It limits the current to a safe value (about 10–20 mA). Without it, the LED would draw too much current and burn out. R = (supply voltage − LED voltage) ÷ current.
How is 230 V AC converted to 5 V DC for the circuit?
A transformer steps down the voltage, a bridge rectifier converts AC to pulsating DC, a capacitor smooths it and a 7805 regulator gives a steady 5 V.
Explain the block diagram of your project.
The input section senses the real-world quantity, the 8051 microcontroller with board processes it according to the program, and the output section displays the result and drives the actuators. The power supply section feeds every block.
Which communication protocols are used between the modules?
The sensors give digital or analog signals read directly by the controller's I/O and ADC pins, and outputs are driven through transistor or relay drivers.
What is the operating voltage of the circuit?
The controller and most sensors work at 5 V (ESP boards and some modules at 3.3 V). A 12 V adapter powers the board, and a regulator steps it down. Motors and relays get their own supply line so they do not reset the controller.
How did you calculate the power rating of your system?
Using P = V × I for each load, adding a margin of 20 to 25%.
Related projects
Academic use: Project Buddyy offers mentoring, guidance and reference material for learning. You stay responsible for following your institution's academic integrity rules and for understanding everything you submit.
Want to build Ultrasonic Radar?
Send your college, deadline and team size. We confirm the scope, cost and what you will submit.