E&TC / ECE · GSM and GPS · Final year project
Automated Water Pump with Dry Run Intimation using GSM
A GSM-controlled water pump for farms and tanks. The farmer switches the pump on or off by SMS, and if water stops flowing the controller detects the dry run, stops the motor and sends an SMS alert.
What is the Automated Water Pump with Dry Run Intimation using GSM project?
A GSM-controlled water pump for farms and tanks. The farmer switches the pump on or off by SMS, and if water stops flowing the controller detects the dry run, stops the motor and sends an SMS alert.
Key facts
- Domain
- GSM and GPS projects
- Type
- Final year project · Intermediate
- Suitable for
- Diploma capstone and B.E / B.Tech final year
- Build time
- 4 to 6 weeks
- Estimated component cost
- ₹2,500 – ₹3,700
- Guidance from
- ₹9,999 (Hardware / IoT Final Year)
How the Automated Water Pump with Dry Run Intimation using GSM works
- 12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V.
- The Push buttons and switches provide manual inputs and the power switch.
- The ATmega328P microcontroller with base board is the brain of the circuit: it samples the sensors, compares readings with set limits and switches the outputs.
- The GSM module sends SMS alerts or makes calls to the registered phone number using a normal SIM card.
- The LEDs indicate status.
Block diagram
Inputs
Push buttons and switchesController
ATmega328P microcontroller with base boardCommunication
GSM moduleOutputs
LEDsComponents list and cost
Typical prices from Indian online stores and electronics markets (Lamington Road, Budhwar Peth, SP Road). Buy from one store where you can to save on shipping.
| Component | Qty | What it does | Approx. cost |
|---|---|---|---|
| ATmega328P microcontroller with base board | 1 | Is the brain of the circuit: it samples the sensors, compares readings with set limits and switches the outputs. | ₹350 |
| Push buttons and switches | 2 | Provide manual inputs and the power switch. | ₹80 |
| GSM module (SIM800L) | 1 | Sends SMS alerts or makes calls to the registered phone number using a normal SIM card. | ₹450 |
| LEDs (assorted) | 1 | Indicate status. | ₹20 |
| 12 V power adapter / step-down transformer | 1 | Supplies stable low-voltage power from the mains. | ₹250 |
| I R Transmitter Receiver | 1 | Part from the design specification | ₹150* |
| Passive components, PCB and wiring kit | 1 | Crystal oscillator, resistors (assorted), capacitors (assorted), transistors / MOSFETs, cables, connectors and jumper wires, diodes, PCB / breadboard and ICs and IC sockets. | ₹445 |
| Wiring, PCB, soldering and enclosure | 1 | Project overhead | ₹450 |
| Demo model base / mounting board | 1 | Project overhead | ₹500 |
| Testing spares and replacements | 1 | Project overhead | ₹300 |
| Estimated total | Varies with brand, quality and city | ₹2,500 – ₹3,700 |
Prices are estimates for budgeting; items marked * depend on the exact size or model chosen. We confirm the bill of materials when your design is frozen, and components are charged at actual cost with bills.
How much does this project cost?
| Option | What you get | Cost |
|---|---|---|
| Components only | You buy the parts and build it yourself | ₹2,500 – ₹3,700 |
| Hardware / IoT Final Year | Working model or guided build, Circuit diagram and bill of materials, Firmware / code with explanation | from ₹9,999 + components |
| Capstone Project (CPE) | Working project or model, Black book in MSBTE format, Step-by-step explanation | ₹9,999 + components |
| Diploma ITR | 100% working source code, Project report PDF, PPT | ₹1,999 + components |
No GST and no hidden charges. Use the cost calculator for a quote with your deadline and add-ons, or see all plans.
Download the project brief (PDF)
Summary, working, components and cost and viva questions on one branded PDF to show your guide or team. To get it developed, contact us on WhatsApp.
What you submit with this project
- Working model with circuit diagram and program code
- Project report or black book in your university's chapter order (block diagram, circuit, calculations, results)
- Presentation for the review and final viva
- Synopsis for topic approval, if your college asks for one
E&TC / ECE viva questions on this project
What is the aim of the Automated Water Pump with Dry Run Intimation using GSM project?
A GSM-controlled water pump for farms and tanks. The farmer switches the pump on or off by SMS, and if water stops flowing the controller detects the dry run, stops the motor and sends an SMS alert.
Explain the working of your project in short.
12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V. The Push buttons and switches provide manual inputs and the power switch. The ATmega328P microcontroller with base board is the brain of the circuit: it samples the sensors, compares readings with set limits and switches the outputs. The GSM module sends SMS alerts or makes calls to the registered phone number using a normal SIM card.
Why is a microcontroller used in this project?
A microcontroller combines a CPU, memory and I/O pins on one chip, so a single low-cost IC can read sensors, make decisions in code and control loads without a computer.
Why is a pull-up resistor needed with a push button?
Without it the input pin floats and reads random values. The pull-up keeps it HIGH until the button connects it to ground.
How does the GSM module send an SMS?
The microcontroller sends AT commands over serial, for example AT+CMGF=1 to select text mode and AT+CMGS with the phone number followed by the message. The module transmits it over the mobile network.
Why is a resistor connected in series with an LED?
It limits the current to a safe value (about 10–20 mA). Without it, the LED would draw too much current and burn out. R = (supply voltage − LED voltage) ÷ current.
How is 230 V AC converted to 5 V DC for the circuit?
A transformer steps down the voltage, a bridge rectifier converts AC to pulsating DC, a capacitor smooths it and a 7805 regulator gives a steady 5 V.
Explain the block diagram of your project.
The input section senses the real-world quantity, the ATmega328P microcontroller with base board processes it according to the program, and the output section acts locally and sends the data or alert wirelessly. The power supply section feeds every block.
Which communication protocols are used between the modules?
UART (serial) for the GSM, GPS, Bluetooth or fingerprint modules. Each protocol was chosen because the module supports it and it uses the fewest pins.
What is the operating voltage of the circuit?
The controller and most sensors work at 5 V (ESP boards and some modules at 3.3 V). A 12 V adapter powers the board, and a regulator steps it down. Motors and relays get their own supply line so they do not reset the controller.
Related projects
Academic use: Project Buddyy offers mentoring, guidance and reference material for learning. You stay responsible for following your institution's academic integrity rules and for understanding everything you submit.
Want to build Automated Water Pump with Dry Run Intimation using GSM?
Send your college, deadline and team size. We confirm the scope, cost and what you will submit.