E&TC / ECE · Robotics and drone · Final year project
Pollution Monitoring & Source Tracker Drone
A drone that measures air pollution in the air above a city. A gas sensor on the drone reads pollutant levels at different points, helping locate the source of pollution.
What is the Pollution Monitoring & Source Tracker Drone project?
A drone that measures air pollution in the air above a city. A gas sensor on the drone reads pollutant levels at different points, helping locate the source of pollution.
Key facts
- Branch
- Electronics & Telecommunication (E&TC / ECE); also suits Mechatronics, Instrumentation
- Type
- Final year project · Advanced
- Suitable for
- Diploma capstone and B.E / B.Tech final year
- Build time
- 6 to 8 weeks
- Estimated component cost
- ₹19,300 – ₹28,400
- Guidance from
- ₹9,999 (Hardware / IoT Final Year)
How the Pollution Monitoring & Source Tracker Drone works
- Rechargeable battery supplies the circuit; a regulator gives the controller and sensors a steady 5 V.
- The Arduino Uno R3 reads the inputs, runs the decision logic written in C/C++ and drives the outputs.
- The LEDs indicate status.
Block diagram
Controller
Arduino Uno R3Outputs
LEDsComponents list and cost
Typical prices from Indian online stores and electronics markets (Lamington Road, Budhwar Peth, SP Road). Buy from one store where you can to save on shipping.
| Component | Qty | What it does | Approx. cost |
|---|---|---|---|
| Arduino Uno R3 | 1 | Reads the inputs, runs the decision logic written in C/C++ and drives the outputs. | ₹550 |
| LEDs (assorted) | 1 | Indicate status. | ₹20 |
| Rechargeable battery (12 V 1.3–7 Ah) | 1 | Stores energy and supplies power when mains is absent. | ₹650 |
| Drone frame (450 mm) with landing gear | 1 | Needed for this type of build. | ₹1,800 |
| BLDC motor (1000 KV) with ESC | 4 | Needed for this type of build. | ₹4,600 |
| Flight controller (F4 / Pixhawk-class) | 1 | Needed for this type of build. | ₹3,200 |
| LiPo battery 3S 2200-5200 mAh | 1 | Needed for this type of build. | ₹2,800 |
| RC transmitter and receiver (6-channel) | 1 | Needed for this type of build. | ₹5,200 |
| Propellers (set) | 2 | Needed for this type of build. | ₹600 |
| LiPo balance charger | 1 | Needed for this type of build. | ₹1,600 |
| Smoke | 1 | Part from the design specification | ₹150* |
| Passive components, PCB and wiring kit | 1 | Resistors (assorted), capacitors (assorted), PCB / breadboard and cables, connectors and jumper wires. | ₹310 |
| Wiring, PCB, soldering and enclosure | 1 | Project overhead | ₹450 |
| Demo model base / mounting board | 1 | Project overhead | ₹500 |
| Testing spares and replacements | 1 | Project overhead | ₹300 |
| Estimated total | Varies with brand, quality and city | ₹19,300 – ₹28,400 |
Prices are estimates for budgeting; items marked * depend on the exact size or model chosen. We confirm the bill of materials when your design is frozen, and components are charged at actual cost with bills.
How much does this project cost?
| Option | What you get | Cost |
|---|---|---|
| Components only | You buy the parts and build it yourself | ₹19,300 – ₹28,400 |
| Hardware / IoT Final Year | Working model or guided build, Circuit diagram and bill of materials, Firmware / code with explanation | from ₹9,999 + components |
| Capstone Project (CPE) | Working project or model, Black book in MSBTE format, Step-by-step explanation | ₹9,999 + components |
| Diploma ITR | 100% working source code, Project report PDF, PPT | ₹1,999 + components |
No GST and no hidden charges. Use the cost calculator for a quote with your deadline and add-ons, or see all plans.
Download the project brief (PDF)
Summary, working, components and cost and viva questions on one branded PDF to show your guide or team. To get it developed, contact us on WhatsApp.
What you submit with this project
- Working model with circuit diagram and program code
- Project report or black book in your university's chapter order (block diagram, circuit, calculations, results)
- Presentation for the review and final viva
- Synopsis for topic approval, if your college asks for one
E&TC / ECE viva questions on this project
What is the aim of the Pollution Monitoring & Source Tracker Drone project?
A drone that measures air pollution in the air above a city. A gas sensor on the drone reads pollutant levels at different points, helping locate the source of pollution.
Explain the working of your project in short.
Rechargeable battery supplies the circuit; a regulator gives the controller and sensors a steady 5 V. The Arduino Uno R3 reads the inputs, runs the decision logic written in C/C++ and drives the outputs. The LEDs indicate status.
What microcontroller is on the Arduino Uno and what are its key specifications?
The Uno uses the ATmega328P: 8-bit, 16 MHz clock, 32 KB flash, 2 KB SRAM, 14 digital I/O pins (6 PWM) and 6 analog inputs with a 10-bit ADC.
Why is a resistor connected in series with an LED?
It limits the current to a safe value (about 10–20 mA). Without it, the LED would draw too much current and burn out. R = (supply voltage − LED voltage) ÷ current.
How do you calculate battery backup time?
Backup time (hours) ≈ battery capacity (Ah) × voltage × 0.8 efficiency ÷ load power (W). For example, 12 V 7 Ah at 20 W gives about 3.3 hours.
Explain the block diagram of your project.
The input section senses the real-world quantity, the Arduino Uno R3 processes it according to the program, and the output section displays the result and drives the actuators. The power supply section feeds every block.
Which communication protocols are used between the modules?
The sensors give digital or analog signals read directly by the controller's I/O and ADC pins, and outputs are driven through transistor or relay drivers.
What is the operating voltage of the circuit?
The controller and most sensors work at 5 V (ESP boards and some modules at 3.3 V). The battery powers the board, and a regulator steps it down. Motors and relays get their own supply line so they do not reset the controller.
Is your system open-loop or closed-loop?
Mainly open-loop: the controller runs the actuators for a set time or number of steps. Adding a sensor for feedback would make it closed-loop and more accurate.
What is the difference between accuracy and precision?
Accuracy is how close a reading is to the true value. Precision is how close repeated readings are to each other. A sensor can be precise but inaccurate if it is not calibrated.
Related projects
Academic use: Project Buddyy offers mentoring, guidance and reference material for learning. You stay responsible for following your institution's academic integrity rules and for understanding everything you submit.
Want to build Pollution Monitoring & Source Tracker Drone?
Send your college, deadline and team size. We confirm the scope, cost and what you will submit.