E&TC / ECE · Robotics and drone · Final year project
Remote Vehicle Control Through Cell Phone Using DTMF
A vehicle driven by phone keypad tones. One phone calls another mounted on the vehicle; each key press sends a DTMF tone that an MT8870 decoder converts to a code, and an 8051 microcontroller drives the motors through a driver IC.
What is the Remote Vehicle Control Through Cell Phone Using DTMF project?
A vehicle driven by phone keypad tones. One phone calls another mounted on the vehicle; each key press sends a DTMF tone that an MT8870 decoder converts to a code, and an 8051 microcontroller drives the motors through a driver IC.
Key facts
- Type
- Final year project · Advanced
- Suitable for
- Diploma capstone and B.E / B.Tech final year
- Build time
- 6 to 8 weeks
- Estimated component cost
- ₹8,300 – ₹12,300
- Guidance from
- ₹9,999 (Hardware / IoT Final Year)
How the Remote Vehicle Control Through Cell Phone Using DTMF works
- 12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V.
- The Push buttons and switches provide manual inputs and the power switch.
- The 8051 microcontroller with board runs the embedded C program that scans inputs and controls the outputs through its four I/O ports.
- The HT12D decoder IC checks the received address and outputs the 4 data bits to the controller.
- The Motor driver lets the low-current controller run the motors forward, reverse and at variable speed.
- The DC geared motor provides the driving motion.
- The LEDs indicate status.
Block diagram
Inputs
Push buttons and switchesController
8051 microcontroller with boardCommunication
HT12D decoder ICOutputs
Motor driverDC geared motorLEDsComponents list and cost
Typical prices from Indian online stores and electronics markets (Lamington Road, Budhwar Peth, SP Road). Buy from one store where you can to save on shipping.
| Component | Qty | What it does | Approx. cost |
|---|---|---|---|
| 8051 (AT89S52) microcontroller with board | 1 | Runs the embedded C program that scans inputs and controls the outputs through its four I/O ports. | ₹300 |
| Push buttons and switches | 2 | Provide manual inputs and the power switch. | ₹80 |
| HT12D decoder IC | 1 | Checks the received address and outputs the 4 data bits to the controller. | ₹40 |
| Motor driver (L298N) | 1 | Lets the low-current controller run the motors forward, reverse and at variable speed. | ₹180 |
| DC geared motor | 2 | Provides the driving motion. | ₹500 |
| LEDs (assorted) | 1 | Indicate status. | ₹20 |
| 12 V power adapter / step-down transformer | 1 | Supplies stable low-voltage power from the mains. | ₹250 |
| Mild steel frame and fabrication | 1 | Forms the main structure that holds all parts. | ₹2,500 |
| Robot chassis (metal / acrylic) | 1 | Needed for this type of build. | ₹1,100 |
| Wheels / castor wheels | 4 | Allow the machine or vehicle to move. | ₹1,600 |
| Li-ion battery pack (18650 × 3, 11.1 V) with BMS | 1 | Needed for this type of build. | ₹1,400 |
| Batteries | 1 | Part from the design specification | ₹150* |
| Passive components, PCB and wiring kit | 1 | Resistors (assorted), capacitors (assorted), transistors / MOSFETs, cables, connectors and jumper wires, diodes, PCB / breadboard and ICs and IC sockets. | ₹430 |
| Wiring, PCB, soldering and enclosure | 1 | Project overhead | ₹450 |
| Demo model base / mounting board | 1 | Project overhead | ₹500 |
| Testing spares and replacements | 1 | Project overhead | ₹300 |
| Estimated total | Varies with brand, quality and city | ₹8,300 – ₹12,300 |
Prices are estimates for budgeting; items marked * depend on the exact size or model chosen. We confirm the bill of materials when your design is frozen, and components are charged at actual cost with bills.
How much does this project cost?
| Option | What you get | Cost |
|---|---|---|
| Components only | You buy the parts and build it yourself | ₹8,300 – ₹12,300 |
| Hardware / IoT Final Year | Working model or guided build, Circuit diagram and bill of materials, Firmware / code with explanation | from ₹9,999 + components |
| Capstone Project (CPE) | Working project or model, Black book in MSBTE format, Step-by-step explanation | ₹9,999 + components |
| Diploma ITR | 100% working source code, Project report PDF, PPT | ₹1,999 + components |
No GST and no hidden charges. Use the cost calculator for a quote with your deadline and add-ons, or see all plans.
Download the project brief (PDF)
Summary, working, components and cost and viva questions on one branded PDF to show your guide or team. To get it developed, contact us on WhatsApp.
What you submit with this project
- Working model with circuit diagram and program code
- Project report or black book in your university's chapter order (block diagram, circuit, calculations, results)
- Presentation for the review and final viva
- Synopsis for topic approval, if your college asks for one
E&TC / ECE viva questions on this project
What is the aim of the Remote Vehicle Control Through Cell Phone Using DTMF project?
A vehicle driven by phone keypad tones. One phone calls another mounted on the vehicle; each key press sends a DTMF tone that an MT8870 decoder converts to a code, and an 8051 microcontroller drives the motors through a driver IC.
Explain the working of your project in short.
12 V power adapter / step-down transformer supplies the circuit; a regulator gives the controller and sensors a steady 5 V. The Push buttons and switches provide manual inputs and the power switch. The 8051 microcontroller with board runs the embedded C program that scans inputs and controls the outputs through its four I/O ports. The HT12D decoder IC checks the received address and outputs the 4 data bits to the controller.
What is the architecture of the 8051 microcontroller?
The 8051 is an 8-bit Harvard-architecture microcontroller with 4 KB ROM (8 KB in AT89S52), 128 bytes RAM, four 8-bit I/O ports, two 16-bit timers, a UART and five interrupt sources.
Why is a pull-up resistor needed with a push button?
Without it the input pin floats and reads random values. The pull-up keeps it HIGH until the button connects it to ground.
What does the HT12D do?
It receives the serial stream from the RF receiver, checks that the address matches and latches the 4 data bits on its output pins.
Why can't the motor be connected directly to the microcontroller?
A motor needs far more current (hundreds of mA to amps) than a controller pin can supply (about 20–40 mA). The H-bridge driver switches the motor current and allows direction control.
Why is a geared motor used?
The gearbox reduces speed and multiplies torque, so a small DC motor can move a vehicle or mechanism smoothly. Torque increases roughly by the gear ratio.
Explain the block diagram of your project.
The input section senses the real-world quantity, the 8051 microcontroller with board processes it according to the program, and the output section displays the result and drives the actuators. The power supply section feeds every block.
Which communication protocols are used between the modules?
The sensors give digital or analog signals read directly by the controller's I/O and ADC pins, and outputs are driven through transistor or relay drivers.
What is the operating voltage of the circuit?
The controller and most sensors work at 5 V (ESP boards and some modules at 3.3 V). The battery powers the board, and a regulator steps it down. Motors and relays get their own supply line so they do not reset the controller.
Related projects
Academic use: Project Buddyy offers mentoring, guidance and reference material for learning. You stay responsible for following your institution's academic integrity rules and for understanding everything you submit.
Want to build Remote Vehicle Control Through Cell Phone Using DTMF?
Send your college, deadline and team size. We confirm the scope, cost and what you will submit.